Model Number Configuration - Nagano Keiki KH41 Manual

Model number configuration 1

Model
K H 4 1
Process Applications
Pressure Transmitters
Model number
①
Type
②
Connection
Please specify applicable
range code as well as
pressure range and
engineering unit.
Treatment of wetted parts
■Use no oil
Manufacture/process wetted parts not to retain oils.
■Use no water
Manufacture/process wetted parts not to retain water.
■Use no oil & water
Manufacture/process wetted parts not to retain oils and water.
＊Specify by code "X" if there is no applicable specification.
KH41 ・43, KD41 ・43
Process Applications Pressure Transmitter
Please specify the model number, each specs and the range for ordering.
3
① ② ③
1 Direct mounting
2 Surface mounting
3 ２B Pipe mounting
3 G3/8B (Diaphragm only)
7 Rc1/4
9 Rc1/2
3 SCS14 + SUS316
③
Wetted parts
material
④
Pressure range
⑤
Accuracy
⑥
Power source
1
④ ⑤ ⑥ ⑦ ⑧
Selective spec.
1 0 to 5, 10, 20, 30, 40, 50kPa
2 0 to 0.1, 0.2, -0.1 to 0MPa
3 ±5, ±10, ±20, ±30, ±40, ±50kPa
4 ±0.1, -0.1 to 0.2MPa
4 ±0.25％F.S.
5 ±0.5％F.S.
7 ±1.0％F.S. (Diaphragm type)
1 24V DC±10％
9 Others
1 4 to 20mA DC, 2 wire system
⑦
Output
⑨
Treatment
⑩
Other additional
spec.
⑮
Document
5
⑨ ⑩ ⑪ ⑫ ⑬
Additional spec. (Option)
0 Nil
1 Use no oil
2 Use no water
3 Use no oil & water
0 Nil
1 Diaphragm type specification
(Main body + add to the diaphragm part)
(Please refer to SC□□)
0 Nil
1 Required
(Please specify the desired documents separately)
Submission drawings,
instruction manual,
inspection procedure, mill sheet,
test report (1 pc 1 copy),
inspection / traceability certificate,
standard inspection report,
strength calculation,
attended inspection
⑭ ⑮