Timer; Stopwatch - Gaggenau BMP 224/225 Instruction Manual

Timer

The timer only runs if no other function is set. You can
enter a maximum of 90 minutes.
Setting the timer
1 Call up timer menu.
Š
The "Timer" function is displayed.
2 Turn the rotary selector to set the required cooking
time.
I
3 Start with .
The timer menu closes and the time begins to count
Š
down. The symbol and the countdown appear in the
display.
A signal sounds once the time has elapsed. Touch the
™ symbol to silence.
You can exit the timer menu at any time by touching the
' symbol. This erases the settings.
To stop the timer:
Call up timer menu. Touch
function and touch the
continue counting down, touch the
Switching off the timer early:
Call up timer menu. Touch
function and touch the Ž symbol.
C
to select the "Timer"
H
symbol. To allow the timer to
I
symbol.
C
to select the "Timer"

Stopwatch

The stopwatch only runs if no other function is set.
The stopwatch counts from 0 seconds up to 90 minutes.
It also has a pause function, which enables you to
temporarily stop the clock.
Starting the stopwatch
1 Call up the "Timer" menu.
C
2 Touch
I
3 Press to start.
The "Timer" menu is closed and the time starts counting
down. The p symbol and the elapsed time are shown in
the display.
Pausing and restarting the stopwatch
1 Call up the "Timer" menu.
C
2 Touch
Š
3 Touch the
Š
The time stops. The symbol changes to
to select the p "Stopwatch" function.
to select the p "Stopwatch" function.
H
symbol.
I
"Start".
21