Timer Functions; Childproof Lock - Gaggenau BMP224 User Manual And Installation Instructions

14

Timer functions

Your appliance has different timer functions, with which
you can control its operation.
14.1 Calling up the timer menu
Requirements
¡ The appliance is activated.
¡ The function selector is set to
Press ⁠ .
▶
a The timer menu is displayed.
Notes
¡ If you turn the function selector to a type of heating
or basic settings while the short-term timer or stop
watch is running, a notification appears on the dis-
play.
Press to confirm the notification and interrupt the
short-term timer or the stop watch. The appliance is
ready to use.
¡ In order to continue the short-term timer or stop
watch, turn the function selector to
¡ You can use the short-term timer and the stopwatch
at the same time.
¡ If the function selector is set to , the display only
shows the short-term timer.
¡ If the function selector is set to
the short-term timer and the stopwatch.
14.2 Short-term timer
The short-term timer only runs if you have not set any
other function. You can enter a maximum of
90 minutes.
Set the short-term timer
Call up the timer menu.
1.
a The display shows "Timer" ⁠ .
Use the rotary selector to set the required cooking
2.
time.
Press to start.
3.
a The appliance closes the timer menu and the time
counts down.
a The display shows
a A signal tone sounds once the time has elapsed. If
you press , you can end the signal early.
15

Childproof lock

You can secure your appliance to prevent children
from accidentally switching it on or changing the set-
tings.
15.1 Activating the childproof lock
Requirements
¡ The childproof lock is set to "Available" in the basic
settings.
¡ The function selector is set to ⁠ .
or ⁠ .
or ⁠ .
, the display shows
and the time that has elapsed.
to exit the timer menu. The settings are
Tip: Press
lost.
Stopping the short-term timer
Press ⁠ .
1.
Use and "Timer" to select
2.
To allow the timer to continue counting down, press
3.
⁠ .
Switching off the timer early
Press ⁠ .
1.
Use and "Timer" to select
2.
14.3 Stopwatch
The stopwatch only runs if you have not set any other
function. The stopwatch counts upwards from
0 seconds up to 90 minutes.
You can use the pause function to pause the stop-
watch occasionally.
Starting the stopwatch
Press ⁠ .
1.
Use to select "Stopwatch" ⁠ .
2.
Press to start.
3.
a The appliance closes the timer menu and the time
counts down.
a The display shows
Stopping the stopwatch
Press ⁠ .
1.
Use to select "Stopwatch" ⁠ .
2.
Press ⁠ .
3.
a The time stops and the symbol switches to start ⁠ .
Press to start the stopwatch.
4.
a The time continues to run. Once it has reached
90 minutes, the display pulses and a signal tone
sounds. If you press
a goes out on the display and the procedure is
ended.
Switching off the stopwatch
Press ⁠ .
1.
Use to select "Stopwatch" ⁠ .
2.
Press ⁠ .
3.
Press and hold for approx. 6 seconds.
▶
a The standby display appears and the display shows
⁠ .
Note: If there is a power cut after the childproof lock
has been activated, the childproof lock may be deactiv-
ated when the power comes back on.
15.2 Deactivating the childproof lock
Requirement: The function selector is set to ⁠ .
Press and hold for approx. 6 seconds.
▶
Timer functions en
and press ⁠ .
and press ⁠ .
and the time that has elapsed.
, you can end the signal.
17