Running The Cleanup Utility; Installing The Printer And Driver Again - DataCard Sp35 Installation Manual

36

Running the Cleanup utility

Tips for success
• Download the Cleanup Utility from the downloads area of www.datacard.com.
• The cleanup utility is also available on the printer driver CD-ROM.
• If you have attempted to delete the printer and the icon remains, run the Cleanup utility as though the driver
was deleted.
1 Begin with all Smart Driver™ printer drivers deleted from the PC. Make sure you have restarted Windows after
deleting the drivers.
2 Start the Cleanup process:
— If you downloaded the Cleanup Utility, double-click the Cleanup.exe file to extract and start the utility.
— Insert the Smart Driver™ CD-ROM in the PC's drive. Select Driver Support Programs and then click
Cleanup Utility.
3 Click OK and then Unzip to extract files and start the Cleanup Utility.
4 Click OK when files are extracted. The Cleanup Utility starts automatically.
5 Click Yes on the Question box to open the Cleanup.pdf file using Acrobat Reader. This file provides specific
instructions on running the Cleanup utility. Follow the instructions carefully.
6 Exit the Smart Driver™ window and remove the CD-ROM if used.
7 When you run the Cleanup Utility, it removes the SP Series Info Central and e-Guide from the PC.

Installing the printer and driver again

The steps to follow to install the printer and driver depend on the operating system and how you will connect the
printer and PC. See "Installation choices" for guidance.
SP Series Install e-Guide