Husqvarna 129C Operator's Manual page 6

INTRODUCTION...............................................................................6
SAFETY............................................................................................ 7
ASSEMBLY....................................................................................... 9
OPERATION................................................................................... 10
MAINTENANCE.............................................................................. 11
TECHNICAL DATA......................................................................... 13
ACCESSORIES.............................................................................. 14
EMISSION CONTROL WARRANTY STATEMENT........................ 14
Operator's manual
The initial language of this operator's manual is English.
Operator's manuals in other languages are translations
from English.
Overview
See Picture 14.
1. Trimmer head
2. Grease filler cap
3. Bevel gear
4. Cutting attachment guard
5. Shaft
6. Loop handle
7. Throttle trigger
8. Stop switch
9. Throttle trigger lockout
10. Spark plug cap, spark plug
11. Starter housing
12. Starter rope handle
13. Fuel tank
14. Air filter cover
15. Primer bulb
16. Choke control
17. Drive disc
18. Operator's manual
Symbols on the product
Warning (Picture 1)
Read this manual (Picture 2)
Use approved head protection (Picture 3)
Use approved hearing protection (Picture 3)
Use approved eye protection (Picture 3)
6
C C ontents
INTRODUCTION
Use approved protective gloves (Picture 4)
Use protective shoes/boots (Picture 5)
The product can cause objects to eject, which can cause
damage to the eyes (Picture 6)
The product can cause objects to eject, which can cause
damage to the eyes (Picture 7)
Max. speed of the output shaft (Picture 8)
Safe distance (Picture 9)
Only use an approved trimmer line. Do not use a blade
(Picture 10)
Do not use a cutting attachment made of metal. (Picture
11)
Make sure that long hair is put up above your shoulders
(Picture 12)
The arrows show the limits for the position of the handle
(Picture 13)
Note: Other symbols/decals on the product refer to
certification requirements for other commercial areas.
Product liability
As referred to in the product liability laws, we are not
liable for damages that our product causes if:
• the product is incorrectly repaired.
• the product is repaired with parts that are not from
the manufacturer or not approved by the
manufacturer.
• the product has an accessory that is not from the
manufacturer or not approved by the manufacturer.
• the product is not repaired at an approved service
center or by an approved authority.
190 - 002 -