Tested Configurations; Testing Compliance Information - Sunrise Medical Quickie QRi Manual

QUICKIE/ZIPPIE
K. TESTED CONFIGURATIONS
Quickie 2 was tested in the specific configuration of
16"x18", 16:-19" straight back canes, standard
back/seat upholstery, 2" cushion, 70 degree swing
in/out hanger with composite footplate and heel loops,
6" polyurethane front caster, 7" front fork, and a 24"
mag rear wheel with a pneumatic tire and airless
insert.
The Q2 in this configuration has a pivot width of
54inches.
Quickie 2 HD (Heavy Duty Version) was tested in the
specific configuration of 18"x18", 16"-19" straight back
canes, stabilizer bar, standard back/seat upholstery, 2"
cushion, 70 degree swing in/out hanger with composite
footplate and heel loops, 6" polyurethane front caster,
7" front fork, and a 24" mag rear wheel with a pneu-
matic tire and airless insert.
The Q2HD in this configuration has a pivot width of
57inches
Quickie QRi.
The QRi was tested in the specific configuration 16" x
18", 16" -20" straight back canes, standard back and
seat upholstery, 2" cushion, Tubular footrest, 5" low
poly front caster and std fork, and a 24" lite spoke
rear wheel with a pneumatic tire and airless insert.
The Quickie QRi in this configuration has a pivot
width of 58inches
Q7 was tested in the specific configuration 16" x18",
16"-20" straight back canes, standard back and seat
upholstery, 2" cushion, tubular footrest with leg strap,
5" low poly front caster, standard fork, and a 24" lite
spoke rear wheel with a pneumatic tire and airless
insert
The Q7 in this configuration has a pivot width of
52inches
Quickie IRIS, and Zippie IRIS
The Quickie IRIS was selected to represent both in
testing.
The IRIS was tested in a specific configuration 18"x
18", straight back canes 15"- 21", solid back and 2"
cushion on a seat pan, 70° swing in/out hanger with
composite footplate and heel loop, 6" poly front cast-
er, 6" fork, and a 12" Mag rear wheel with an airless
tire and pneumatic insert.
The Quickie IRIS in this configuration has a pivot
width of 56inches.
120683 Rev. B
L. TESTING COMPLIANCE INFORMATION
Quickie 2 std (265 lbs wt. cap), have been crash-tested
with a 172 lb (78Kg) crash dummy. The Quickie Q7
(265 lbs wt. cap), Quickie QRi (265 lbs wt. cap), and
Quickie IRIS std (250 lbs wt. cap) have been crash-
tested with a 225 lbs (102 kg) crash dummy. The
Quickie 2 HD Heavy duty wheelchair (350 lb wt. cap)
has been crash-tested with a 225 lb (102kg) crash
dummy. All wheelchairs listed have been tested in
accordance with ANSI/RESNA WC (1998) V.1- Section
19 and/or ANSI/RESNA (2012) V.4 WC-19.- Front
impact test requirements for wheelchairs.
NOTE: ANSI = American National Standards Institute,
RESNA= Rehabilitation Engineering and
Assistive Technology Society of North
America.
6
TRANSIT SECUREMENT