Extended Wifi Setup; Advance - TRENDnet tew-737hre User Manual

Extended WiFi Setup

This page allows you to configure the wireless LAN settings for your Repeater. You have the
option of creating a new Wi-Fi Network Name for your Repeater or you may use the same Wi-
Fi Network Name as your wireless router or AP.
Wi-Fi Network Name: Displays the current Wi-Fi Network Name you are connected to.
Extended Wi-Fi Network Name: Select Same as Wi-Fi Network Name or Create a new Wi-Fi Network Name.
Channel Width: Select the Channel Width:
Auto 20/40 - This is the default setting. Select if you are using both 802.11n and non-802.11n wireless devices.
20MHz - Select if you are not using any 802.11n wireless clients.
Security Mode:
Select WEP or WPA Personal.

Advance

These settings are advanced options that can be configured to change advanced wireless broadcast specifications. It is recommended
that these settings remain set to their default values unless you are knowledgeable about the effects of changing these values.
Changing these settings incorrectly can degrade performance.
7