European Communities (Ec) Directive Compliance; Emc Directive; Low Voltage Directive - Allen-Bradley 1757-PIM Installation Instructions Manual

Parameter
Certifications:
FM, CSA
Unclassified Areas
FM Class 1, Div. 2
C-tick
(1)
A value of 70°C (158°F) is the maximum "component ambient" temperature when the air temperature below
the chassis is 0° to 60°C (32 to 140°F).

European Communities (EC) Directive Compliance

If this product has the CE mark it is approved for installation within the European
Union and EEA regions. It has been designed and tested to meet the following
directives.

EMC Directive

This product is tested to meet the Council Directive 89/336/EC Electromagnetic
Compatibility (EMC) by applying the following standards, in whole or in part,
documented in a technical construction file:
• EN 50081-2 EMC — Generic Emission Standard, Part 2 — Industrial
Environment
• EN 50082-2 EMC — Generic Immunity Standard, Part 2 — Industrial
Environment
This product is intended for use in an industrial environment.

Low Voltage Directive

This product is tested to meet Council Directive 73/23/EEC Low Voltage, by
applying the safety requirements of EN 61131-2 Programmable Controllers, Part 2 -
Equipment Requirements and Tests. For specific information required by EN
61131-2, see the appropriate sections in this publication, as well as the
Allen-Bradley publication Industrial Automation Wiring and Grounding Guidelines
For Noise Immunity, publication 1770-4.1.
This equipment is classified as open equipment and must be mounted in an
enclosure during operation to provide safety protection.
Specification
Yes
Mounting and interfacing
Mounting – maintenance requires a hot work permit
Yes
Publication 1757-IN900A-US-P - February 2000
ProcessLogix Pulse Input Module 13