Table of Contents
Advertisement
Direct Code Entry
1. Press and hold the
CODE SEARCH
indicator stays on, then release the
2. Press and release the desired mode button (
red indicator blinks, then stays lit.
3. Enter the 3 digit code from the code tables (on separate sheet).
Note: after a valid code entry, the red indicator turns off. For
an invalid code, the red indicator flashes.
4. With your device on, press
responds, no further programming is required. Note: If some
buttons do not operate your equipment, try one of the other
codes for your brand.
2.
1.
3.
Write your codes down here for easy reference later.
Type
Type stored
TV
VCR
CABLE
DVD
CD
SAT
AUX
button until the red
button.
CODE SEARCH
,
, etc.). The
TV
VCR
. If the device
CHANNEL UP
Code
TV
10
Programming with Code Search
If your product does not respond after you have tried all the codes
for your brand, or if your brand is not listed, try searching for your
code by following these steps.
1. Manually turn on the device (
2. Press and hold the
CODE SEARCH
indicator stays on, then release the
3. Press and quickly release the desired mode button (
etc.). The red indicator blinks off once.
4. Press the
button repeatedly (up to 300 times)
CHANNEL UP
until the device to be controlled changes channel. The red
indicator blinks off with each button press. If you accidentally
overshoot the code required, press the
button to backtrack through the library until the device
changes channel. Pressing
forward again.
5. Press and release
to install the code.
MUTE
Most users will store
codes under the
VCR
codes under
, etc. If (for example) you want to store a
CABLE
code under
, first follow the procedure for Direct Code Entry
CABLE
(page 10) and press
in step 2 of Direct Code Entry, then
CABLE
enter ANY VCR code in step 3 of Direct Code Entry. Then follow
the steps above for Code Search (or Brand Search, page 12).
Note: If the device does not have a
(
only) or
VCR
PLAY
POWER
currently stored three digit number under that mode.
3.
2.
,
, etc.) to be controlled.
TV
VCR
button until the red
button.
CODE SEARCH
,
TV
CHANNEL DOWN
changes direction to
CHANNEL UP
button, Cable
VCR
button, use
CHANNEL UP
instead. Code Search starts from the
11
,
VCR
VCR
4.
5.
Advertisement
Table of Contents
