Troubleshooting - Philips PH750 Owner's Manual

Troubleshooting

Remote does not operate your product.
• Press the mode button of the product you want to control.
• Program the remote with a new code.
• Install new batteries. (You might have to reprogram your
remote after installing new batteries.)
• Remote may not be compatible with your product.
Remote does not operate some features of your product.
• Program remote with a new code.
• Remote may not be able to operate all features of your product
or button names might be different than your product.
Red Indicator blinks after you program a product code.
• Remote did not accept the code.
• Try to program the code again or try a different code.
Problems with Learning
Please note that you can only learn one device type under any
Mode key. E.G. you can only learn TV codes under the TV mode,
VCR codes under the VCR mode, etc. If you are trying to learn
from a "Universal" remote, it might have more than one code type
stored under a mode. Also, some functions from some types of
remotes might not be able to be learned. So try learning from
another remote to see if there's a problem with the type or brand of
remote you are trying to learn from.
1. Use fresh batteries for both the Learning Remote and the
Original Remote.
2. Perform a Master Clear (see page 19) before learning.
3. Place the original remote end-to-end with the Learning Remote
so the IR transmitters on both remotes are directly in line with
each other. Keep the two remotes about one inch away from
each other. For some brands you might need to place the
remotes a bit closer, so some experimentation might be needed.
4. Do not try to learn directly under an incandescent or low-
energy light as these can cause interference with learning. Keep
at least three feet away from any such light sources.
Note: No functions may be stored under
, or any Mode button.
SEARCH
For help with setup, please call: 919-573-7854.
,
SLEEP LEARN, CODE
22
Lifetime Warranty
Philips warrants that this product shall be free from defects
in material, workmanship and assembly, under normal use, in
accordance with the specifications and warnings, for the life
of the product. This warranty extends only to the original
purchaser and is nontransferable. Defective products must
be returned with the dated proof of purchase to the place of
purchase for replacement. THERE ARE NO OTHER
EXPRESS OR IMPLIED WARRANTIES. Incidental or
consequential damages are disclaimed where permitted by
law.
Made in China, Quality Assured in USA
Clifton, NJ 07014-1115
23