Code Identification; Sleep Timer - Philips PH750 Owner's Manual

Code Identification

The Code Identification Feature allows you to identify the three
digit library code stored under your device key. For example, if you
want to find out what three digit code is stored under your TV
device key, follow the six steps below:
1. Press and hold the
CODE SEARCH
indicator stays on. Release the
2. Press and release the desired mode button (TV,
red indicator blinks, then stays lit.
3. Press and release the
CODE SEARCH
blinks off.
4. To find the first digit for the code stored under the mode key
pressed in step 2, press each numeric key from 0-9 in turn.
When the red indicator blinks off the number you pressed is
the first digit for the code you are searching for.
5. To find the second digit, repeat step 4, this time when the red
indicator blinks off this is the second digit.
6. Repeat step 4 again to find the third digit.
2.
1, 3.
4.
button until the red
button.
CODE SEARCH
, etc.). The
VCR
button. The red indicator
14

Sleep Timer

The Sleep feature enables the remote to turn off the TV after a
period of 1 to 99 minutes. Remote is to be in TV mode to set a
Sleep Timer. This feature works even if your TV does not have
this feature.
1. Press and release the
TV
2. Press and hold the
SLEEP
(occurring after approx. 2-3 seconds).
3. Release the button.
SLEEP
4. Press and release the numeric buttons (01-99) for the time
required. The red indicator blinks off to indicate button press
acceptance and remains off after the second button press.
5. TV Sleep Timer now set.
6. Leave the Remote pointing towards the TV with an
unobstructed path.
To cancel the Sleep Timer, press and hold the
seconds until the red indicator blinks or press and release the
button in TV Mode.
POWER
Mode button.
button until red indicator remains on
button for 2-3
SLEEP
15