Chapter9 DHCP
9.1 DHCP Settings
The Dynamic Host Configuration Protocol (DHCP) is an
automatic configuration protocol used on IP networks. If you
enable the built‐in DHCP server on this device, it will automatically
configure TCP/IP protocol settings for all DHCP‐Client‐enabled PCs
in your LAN (Namely, PCs are set to "Obtain an IP address
automatically" and "Obtain DNS server address automatically"),
including IP address, subnet mask, gateway and DNS etc,
eliminating the need for manual intervention.
DHCP Server‐Enable: Check or uncheck the box to enable or
disable the device's DHCP server feature.
Start IP: Enter the starting IP address for the DHCP server's IP
assignment.
End IP: Enter the ending IP address for the DHCP server's IP
assignment.
43