Dhcp - Tenda FH1202 User Manual

①
Click Clone MAC.
②
Click Save to save your settings.
To manually enter the MAC address allowed by your ISP:
①
Enter the MAC address allowed by your ISP.
②
Click Save to save your settings.

2.5. DHCP

DHCP (Dynamic Host Configuration Protocol) assigns an IP address to each device
on the LAN/private network. When you enable the DHCP Server, the DHCP Server
will automatically allocate an unused IP address from the IP address pool specified
in this screen to the requesting device as long as the device is set to "Obtain an IP
Address Automatically". If you disable this feature, you have to manually
configure the TCP/IP settings for all PCs on your LAN to access Internet.
Click Network -> DHCP Server to enter the DHCP Server screen. Here you can
change the DHCP IP address pool and lease time.
Configuration Procedures:
31