Live Call Screening (Lcs) - Panasonic KX-TA624 Operating Instructions Manual

Live Call Screening (LCS)

Allows a proprietary telephone user to listen to messages being recorded while a caller is
leaving a message and, if desired, intercept the call. The voice mailbox can be monitored in
one of 2 ways — Hands-free mode or Private mode.
Hands-free Mode: A message can be monitored automatically through the telephone speaker
Private Mode:
Alert tone
1 s
To intercept the call in either Hands-free or Private mode, press the SP-PHONE button or the
LCS button.
• When the extension user is having a conversation, a Call Waiting tone will be heard if Call
!
!
Waiting has been enabled. The user can put the existing call on hold before accessing LCS.
• A flexible line key or DSS (Direct Station Selection) button can be assigned as a Live Call
Screening (LCS) button.
• To prevent unauthorised monitoring, a 3-digit password must be set by the LCS user. If the
user forgets their password, it can be cleared by the operator or manager.
• Each extension can be programmed to either close the mailbox or keep recording the
conversation after the call is intercepted.
• Required Programming
1.2 System Programming
[620] Live Call Screening Recording Mode Assignment
2.1 Proprietary Telephone Settings
"Customising the Buttons on Your Telephone", Live Call Screening (LCS) Button
"Live Call Screening Mode Set"
2.4 DSS Console Features
"Initial Settings", Live Call Screening (LCS) Button Assignment
• Operation Reference
2.2 Telephone Features
"Live Call Screening (LCS)"
at the same time.
An alert tone will be heard while the caller is leaving a message.
Live Call Screening (LCS) Cancel Button Assignment
System Features
Live Call Screening (LCS) Cancel Button
Installation
1.1
1-7