Sanitas SBC 23 Instructions For Use Manual page 22

Permissible storage -20 °C to +50 °C, ≤85 % relative air humidity,
conditions 800-1050 hPa ambient pressure
Power supply 2 x 1,5 V
Battery life For approx. 180 measurements, depend-
ing on the blood pressure level and/or pump
pressure
Accessories Instruction for use, 2 x 1.5 V AAA batteries,
protective cover for display
Classification Internal supply, IPX0, no AP or APG, continu-
ous operation, type BF applied part
Technical information is subject to change without notification to
allow for updates.
• This unit is in line with European Standard EN 60601-1-2 and is
subject to particular precautions with regard to electromagnetic
compatibility (EMC). Please note that portable and mobile HF
communication systems may interfere with this unit. More details
can be requested from the stated Customer Service address or
found at the end of the instructions for use.
• This device is in line with the EU Medical Devices Directive 93/42/
EC, the "Medizinproduktegesetz" (German Medical Devices
Act) and the standards EN 1060-1 (non-invasive sphygmoma-
nometers, Part 1: General requirements), EN 1060-3 (non-inva-
AAA batteries
sive sphygmomanometers, Part 3: Supplementary requirements
for electro-mechanical blood pressure measuring systems) and
IEC 80601-2-30 (Medical electrical equipment – Part 2 – 30: Par-
ticular requirements for the safety and essential performance of
automated non-invasive blood pressure monitors).
• The accuracy of this blood pressure monitor has been carefully
checked and developed with regard to a long useful life. If using
the device for commercial medical purposes, it must be regularly
tested for accuracy by appropriate means. Precise instructions for
checking accuracy may be requested from the service address.
22