Advertisement
Philips Semiconductors
Video output amplifier
FEATURES
No external heatsink required
Black current measurement output for Automatic Black
current Stabilization (ABS)
Internal 2.5 V reference circuit
Internal protection against positive appearing CRT
flashover discharges
Single supply voltage of 200 V
Simple application with a variety of colour decoders
Controlled switch-off behaviour.
ORDERING INFORMATION
TYPE NUMBER
NAME
TDA6106Q
DBS9MPF
BLOCK DIAGRAM
handbook, full pagewidth
1
n.c.
2
n.c.
7
n.c.
3
inverting
input
1997 Mar 03
plastic DIL-bent-SIL medium power package with fin; 9 leads
feedback
supply voltage
6
MIRROR 1
in
out
V bias
1
TDA6106Q
DIFFERENTIAL
STAGE
out
out
MIRROR 3
GENERAL DESCRIPTION
The TDA6106Q is a monolithic video output amplifier with
a 6 MHz bandwidth and is contained in a 9-lead plastic
DIL-bent-SIL medium power package. The device uses
high-voltage DMOS technology and is intended to drive
the cathode of a CRT. To obtain maximum performance,
the amplifier should be used with black current control.
PACKAGE
DESCRIPTION
output
9
MIRROR 2
out
in
1
out
out
Fig.1 Block diagram.
2
Product specification
CURRENT
SOURCE
in
gnd
4
ground
(substrate)
TDA6106Q
VERSION
SOT111-1
8
cathode
output
black current
5
measurement
output
MBG343
Advertisement
