Philips TDA6107JF Datasheet

Philips TDA6107JF Datasheet

Triple video output amplifier

Advertisement

Quick Links

INTEGRATED CIRCUITS
DATA SHEET
TDA6107JF
Triple video output amplifier
Product specification
2002 Oct 18

Advertisement

Table of Contents
loading

Summary of Contents for Philips TDA6107JF

  • Page 1 INTEGRATED CIRCUITS DATA SHEET TDA6107JF Triple video output amplifier Product specification 2002 Oct 18...
  • Page 2 DBS9MPF 2002 Oct 18 GENERAL DESCRIPTION The TDA6107JF includes three video output amplifiers and is intended to drive the three cathodes of a colour CRT directly. The device is contained in a plastic DIL-bent-SIL 9-pin medium power (DBS9MPF) package, and uses high-voltage DMOS technology.
  • Page 3 Philips Semiconductors Triple video output amplifier BLOCK DIAGRAM handbook, full pagewidth MIRROR 1 CURRENT SOURCE THERMAL PROTECTION CIRCUIT V i(1) , 1, 2, 3 V i(2) , V i(3) PINNING SYMBOL DESCRIPTION inverting input 1 i(1) inverting input 2 i(2)
  • Page 4 Philips Semiconductors Triple video output amplifier LIMITING VALUES In accordance with the Absolute Maximum Rating System (IEC 60134); voltages measured with respect to pin 4 (ground); currents as specified in Fig.1; unless otherwise specified. SYMBOL supply voltage input voltage at pins 1 to 3...
  • Page 5 Philips Semiconductors Triple video output amplifier THERMAL CHARACTERISTICS SYMBOL thermal resistance from junction to ambient th(j-a) thermal resistance from junction to fin th(j-fin) thermal resistance from heatsink to ambient th(h-a) Note 1. An external heatsink is necessary. handbook, halfpage P tot (1) Infinite heatsink.
  • Page 6 Philips Semiconductors Triple video output amplifier CHARACTERISTICS Operating range: T = 20 to +150 C; V o(c1) o(c2) o(c3) (measured in test circuit of Fig.8); unless otherwise specified. SYMBOL PARAMETER quiescent supply current internal reference voltage ref(int) (input stage) input resistance gain of amplifier...
  • Page 7 Philips Semiconductors Triple video output amplifier SYMBOL PARAMETER difference in cathode output propagation time 50% input to 50% output (pins 7 and 8, 7 and 9 and 8 and 9) cathode output rise time o(r) 10% output to 90% output...
  • Page 8 Philips Semiconductors Triple video output amplifier handbook, halfpage 2002 Oct 18 V o(c) Fig.5 Typical DC-to-DC transfer of V Product specification TDA6107JF MBH988 V i (V) to V...
  • Page 9 Philips Semiconductors Triple video output amplifier 4.04 3.08 2.12 V o(c) Fig.6 Output voltage (pins 7, 8 and 9) rising edge as a function of the AC input signal. 2002 Oct 18 t st O v (in %) t o(r) t Pco Product specification...
  • Page 10 Philips Semiconductors Triple video output amplifier 4.04 3.08 2.12 V o(c) Fig.7 Output voltage (pins 7, 8 and 9) falling edge as a function of the AC input signal. 2002 Oct 18 t st O v (in %) t o(f) t Pco Product specification...
  • Page 11 CRT size. Switch-off behaviour The switch-off behaviour of the TDA6107JF is controllable. This is because the output pins of the TDA6107JF are still under control of the input pins for low power supply voltages (approximately 30 V and higher).
  • Page 12 Philips Semiconductors Triple video output amplifier TEST AND APPLICATION INFORMATION handbook, full pagewidth 22 F V i(1) 22 nF 22 F V i(2) 22 nF 22 F V i(3) 22 nF Current sources J1, J2 and J3 are to be tuned so that V...
  • Page 13 Philips Semiconductors Triple video output amplifier INTERNAL CIRCUITRY handbook, full pagewidth 1, 2, 3 to black current measurement circuit 6.8 V to black current measurement circuit (1) All pins have an energy protection for positive or negative overstress situations. 2002 Oct 18...
  • Page 14 Philips Semiconductors Triple video output amplifier PACKAGE OUTLINE DBS9MPF: plastic DIL-bent-SIL medium power package with fin; 9 leads pin 1 index DIMENSIONS (mm are the original dimensions) UNIT max. 18.5 15.5 1.40 17.8 15.1 1.14 Note 1. Plastic or metal protrusions of 0.25 mm maximum per side are not included.
  • Page 15 Philips Semiconductors Triple video output amplifier SOLDERING Introduction to soldering through-hole mount packages This text gives a brief insight to wave, dip and manual soldering. A more in-depth account of soldering ICs can be found in our “Data Handbook IC26; Integrated Circuit Packages”...
  • Page 16 2. The product status of the device(s) described in this data sheet may have changed since this data sheet was published. The latest information is available on the Internet at URL http://www.semiconductors.philips.com. 3. For data sheets describing multiple type numbers, the highest-level product status determines the data sheet status.
  • Page 17 Philips Semiconductors Product specification Triple video output amplifier TDA6107JF NOTES 2002 Oct 18...
  • Page 18 Philips Semiconductors Product specification Triple video output amplifier TDA6107JF NOTES 2002 Oct 18...
  • Page 19 Philips Semiconductors Product specification Triple video output amplifier TDA6107JF NOTES 2002 Oct 18...
  • Page 20 Contact information For additional information please visit http://www.semiconductors.philips.com. For sales offices addresses send e-mail to: sales.addresses@www.semiconductors.philips.com. © Koninklijke Philips Electronics N.V. 2002 All rights are reserved. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner.

Table of Contents