Related Manuals for Philips TDA6106Q
Summary of Contents for Philips TDA6106Q
- Page 1 DATA SHEET TDA6106Q Video output amplifier Product specification File under Integrated Circuits, IC02 INTEGRATED CIRCUITS 1997 Mar 03...
- Page 2 STAGE 1997 Mar 03 GENERAL DESCRIPTION The TDA6106Q is a monolithic video output amplifier with a 6 MHz bandwidth and is contained in a 9-lead plastic DIL-bent-SIL medium power package. The device uses high-voltage DMOS technology and is intended to drive the cathode of a CRT.
-
Page 3: Limiting Values
Philips Semiconductors Video output amplifier PINNING SYMBOL DESCRIPTION n.c. not connected n.c. not connected inverting input voltage ground, substrate black current measurement output supply voltage n.c. not connected cathode output voltage feedback output voltage LIMITING VALUES In accordance with the Absolute Maximum Rating System (IEC 134); voltages with respect to pin 4 (ground) unless otherwise specified;... - Page 4 Philips Semiconductors Video output amplifier HANDLING Inputs and outputs are protected against electrostatic discharge in normal handling. However, to be totally safe, it is desirable to take normal precautions appropriate to handling MOS devices (see “Handling MOS Devices” ). QUALITY SPECIFICATION Quality specification “SNW-FQ-611 part E”...
- Page 5 Philips Semiconductors Video output amplifier SYMBOL PARAMETER cathode output propagation delay time 50% input to 50% output cathode output rise time 10% output to 90% output cathode output fall time 90% output to 10% output settling time 50% input to (99% <...
- Page 6 Philips Semiconductors Video output amplifier V oc Fig.3 Output voltage (pin 8 rising edge) as a function of AC input signal. 1997 Mar 03 overshoot (in %) Product specification TDA6106Q MGA974...
- Page 7 2. With a capacitor larger than10 F on the picture tube Switch-off behaviour The output pins of the TDA6106Q are still under the control of the input pin for a supply voltage down to approximately 30 V. overshoot (in %)
-
Page 8: Test And Application Information
With respect to dissipation, distinction must be made between static dissipation (independent of frequency) and dynamic dissipation (proportional to frequency). The static dissipation of the TDA6106Q is due to supply currents and load currents in the feedback network and CRT. - Page 9 Philips Semiconductors Video output amplifier INTERNAL PIN CONFIGURATION handbook, full pagewidth V in I om 1997 Mar 03 V DD from TDA6106Q input circuit from reference circuit from input circuit from pin 9 from pin 9 6.8 V from reference circuit Fig.6 Internal pin configuration.
-
Page 10: Package Outline
Philips Semiconductors Video output amplifier PACKAGE OUTLINE DBS9MPF: plastic DIL-bent-SIL medium power package with fin; 9 leads pin 1 index DIMENSIONS (mm are the original dimensions) UNIT max. 18.5 15.5 1.40 17.8 15.1 1.14 Note 1. Plastic or metal protrusions of 0.25 mm maximum per side are not included. -
Page 11: Life Support Applications
Philips customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Philips for any damages resulting from such improper use or sale. - Page 12 Tel. +30 1 4894 339/239, Fax. +30 1 4814 240 Hungary: see Austria India: Philips INDIA Ltd, Shivsagar Estate, A Block, Dr. Annie Besant Rd. Worli, MUMBAI 400 018, Tel. +91 22 4938 541, Fax. +91 22 4938 722 Indonesia: see Singapore Ireland: Newstead, Clonskeagh, DUBLIN 14, Tel.