Advertisement
MCD 230M manual 2
02-12-2005
C. Radio mode
When pressed short, these keys select a preset station directly. When pressed
longer than one second, the current station is stored in the preset memory bank.
When PTY mode is selected, the preset memory buttons are shared as follows:
PTY music group - PTY speech group - OFF MUSIC SPEECH
a. POP M, ROCK M
b. EASY M, LIGHT M
c. CLASSICS, OTHER M
d. JAZZ, COUNTRY
e. NATION M, OLDIES
f. FOLK M
D. In CDP mode, press 1PAU button to pause CDP playing, press it again to resu-
me CDP playing.
E. In CDP mode, press 2SCN button to play the first 10 seconds of each song, press
it again to stop scanning and retain playing the song currently selected.
F. In CDP mode, press 3RPT button to play the current track repeatedly.
Press it again to cancel this mode.
G. In CDP mode, press 4SHF button to play the tracks in random order.
Press it again to cancel this mode.
13. PTY (Program type) button
This key is operated as follows:
PTY MUSIC GROUP - PTY SPEECH GROUP - PTY OFF
While selecting PTY TYPE, its selection is implemented by preset buttons as
described in preset key. When PTY is selected, the radio starts to search corres-
ponding PTY information, and stops if the corresponding PTY information is
detected. If corresponding PTY information does not exist anymore, PTY type
automatically exits to normal mode.
14. CLOCK button
Press it to display time on the LCD for a few seconds. Press it, hold and then press
<< or >> button to adjust hour or minute. For MP3 playing, this button can act as
the digit 0 key.
15. AF button (alternative frequencies)
When pressed short, AF switching mode is selected and the state of AF switching
mode is displayed by AF segment in LCD.
Segment off: AF switching mode off.
Segment on: AF switching mode on: Has RDS information.
Segment flashing:AF switching mode is selected, but RDS information is not received yet.
When AF switching mode is selected, the radio checks the signal strength of the AF
all the time.The interval of checking time of each AF depends on the signal strength
08:24
Pagina 3
a. NEWS, AFFAIRS, INFO
b. SPORT, EDUCATE, DRAMA
c. CULTURE, SCIENCE,VARIED
d. WEATHER, FINANCE, CHILDREN
e. SOCIAL, RELIGION, PHONE IN
f. TRAVEL, LEISURE, DOCUMENT
of the current station, from a few minutes for a strong station to a few seconds for
a weak station. Every time that a new AF is stronger than the current station, it swit-
ches over to that frequency for a very short time, and NEW FREQUENCY is dis-
played for 1-2 seconds. Because the mute time of AF switching or checking time is
very short, it is almost inaudible in case of a normal program. When pressed long,
regional mode on /off is activated.
Regional mode ON
AF switching or PI SEEK is implemented to the station where all PI codes are the
same as the current station. REG of individual segment is turned on also, together
with displaying REG ON on the numeric display for a few seconds.
Regional mode OFF
The regional code in the format of PI code is ignored when AF switching or PI SEEK
is implemented. REG of individual segment is turned off together with displaying
REG OFF on the numeric display for a few seconds.
16. BAND button
Press it to select your desired radio band and the band which is selected will be
displayed on the LCD. Press it and hold for more than 2 seconds to activate LOUD
mode.
LOUD MODE:
When reducing the volume to half level, press it to enhance the bass effect.
For MP3 playing, this button can act as the ENTER key.
17. POWER button
Press it to turn the unit on or off.
18. Flashing LED
If the front panel is not on the main unit, LED will be flashing.
19. RESET button
The RESET button is placed on the housing and must be activated with either a
ballpoint pen or a thin metal object. The RESET button is to be activated for the
following reasons:
- Initial installation of the unit when all wiring is completed.
- All the function buttons do not operate.
- Error symbol on the display.
Note: If RESET button is pressed, the unit can't work yet; please use a cotton swab
soaked in isopropyl alcohol to clean the socket on the back of the front panel.
4
Advertisement
