ARCS
WIDE SYSTEM / ARCS
®
rigging manual
VERSION 3.0
WIFOLIFTBAR positioning
Refer to WIFOLIFT on page 8-9.
Hybrid arrays
If you are implementing a hybrid configuration carefully follow the verification procedure outlined in
PROCEDURE C Attaching a WIFOLIFTBAR
ARCSWIFO_RM_EN_3.0
Horizontal 3, 5 or 6 enclosure
Place the enclosures in vertical position, side-by-side, logo down and rails
aligned.
Remove all top WIFORIG bars from their storage location.
Install the WIFOLIFT bar(s).
See WIFOLIFT p 8-9 at the beginning of this section.
Refer to PROCEDURE A.
Slide and lock the WIFORIG bars into all top remaining adjacent rails.
Refer to PROCEDURE A.
Attach a WIFOLIFTBAR to the two WIFOLIFT.
Refer to PROCEDURE C.
Attach a shackle or a CLAMP250 to the WIFOLIFTBAR.
Refer to PROCEDURE D.
Slightly raise the array.
Remove all bottom WIFORIG bars from their storage location.
Slide and lock WIFORIG bars into all bottom adjacent rails.
Refer to PROCEDURE A.
w w w . l - a c o u s t i c s . c o m
FOCUS SYSTEM
®
12