Clay Paky GLOW UP STRIP 100 Instruction Manual
  1. Manuals
  2. Brands
  3. Clay Paky Manuals
  4. DJ Equipment
  5. GLOW UP STRIP 100
  6. Instruction manual

Clay Paky GLOW UP STRIP 100 Instruction Manual

& flight case
Hide thumbs Also See for GLOW UP STRIP 100:
Table of Contents

Advertisement

Quick Links

Download this manual
CONTENTS
Pag.
Contents
2
EN
4
6
8
10
12
12
12
14
16
16
17
18
25
26
26
27
29
30
30
31
GLOW UP STRIP 100
INSTRUCTIONS MANUAL
IT
FR
DE
FLIGHT CASE
Congratulations on choosing a Clay Paky product!
We thank you for your choice. Please note that this
product, as all the others in the rich Clay Paky range,
has been designed and manufactured with total quality
to ensure excellent performance and best meet your
expectations and requirements.
Carefully read this instruction manual in its entirety and
keep it safe for future reference.
It is essential to know the information and comply with
the instructions given in this manual in order to ensure
the fitting is installed, used and serviced correctly and
safely.
CLAY PAKY S.p.A. disclaims all liability for damage to
the fitting or to the other property or persons deriving
from installation, use and maintenance that have not
been carried out in conformity with this instructions
manual, which must always accompany the fitting.
CLAY PAKY S.p.A. reserves the right to modify the
characteristics stated in this instructions manual at any
time and without prior notice.
1
C71080
F21250

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the GLOW UP STRIP 100 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Clay Paky GLOW UP STRIP 100

Summary of Contents for Clay Paky GLOW UP STRIP 100

  • Page 1: Table Of Contents

    INSTRUCTIONS MANUAL Congratulations on choosing a Clay Paky product! CONTENTS We thank you for your choice. Please note that this product, as all the others in the rich Clay Paky range, Pag. Contents has been designed and manufactured with total quality...

  • Page 2: Safety Information

    May be harmful to the eye. EN 62471 This product is intended for the following areas of application: studios, stages, theaters, exhibitions, trade fairs, events, theme parks, entertainment venues, architectural lighting and similar GLOW UP STRIP 100...
  • Page 3 • 2006/95/EC - Safety of electrical equipment supplied at low voltage (LVD) • 199/5/EC – Requirements for radio equipment (R&TTE) • 2011/65/EU - Restriction of the use of certain hazardous substances (RoHS) • 2009/125/EC - EcoDesign requirements for Energy-related Products (ErP) GLOW UP STRIP 100...

  • Page 4: Informazioni Di Sicurezza

    Non fissare la lampada in funzione. Può essere pericoloso per gli occhi. EN 62471 Il prodotto è concepito per essere utilizzato nei seguenti ambiti: studi, palchi, teatri, esposizioni, fiere, eventi, parchi a tema, locali di intrattenimento, illuminazione architettura- le e simili. GLOW UP STRIP 100...
  • Page 5 • 2006/95/CE - Sicurezza delle apparecchiature alimentate in Bassa Tensione (LVD) • 199/5/EC – Requisiti per apparecchiature radio (R&TTE) • 2011/65/UE - Restrizione d’uso di determinate sostanze pericolose (RoHS) • 2009/125/CE - Specifiche per la progettazione ecocompatibile dei prodotti connessi all’energia (ErP) GLOW UP STRIP 100...

  • Page 6: Consignes De Sécurité

    Ne pas fixer la lampe lorsqu’elle est allumée. Peut être dangereux pour les yeux. EN 62471 Le produit est conçu pour être utilisé dans les milieux suivants : studios, scènes, théâtres, expositions, salons, événements, parcs à thème, lieux de divertissement, éclairage architectural et similaires GLOW UP STRIP 100...
  • Page 7 • 2006/95/EC - Safety of electrical equipment supplied at low voltage (LVD) • 199/5/EC – Requirements for radio equipment (R&TTE) • 2011/65/EU - Restriction of the use of certain hazardous substances (RoHS) • 2009/125/EC - EcoDesign requirements for Energy-related Products (ErP) GLOW UP STRIP 100...

  • Page 8: Informationen Zur Sicherheit

    Nicht die Lampe fixieren, wenn sie in Betrieb ist. Kann für die Augen gefährlich sein. EN 62471 Das Produkt wurde für die Verwendung in den folgenden Bereichen entwickelt: Studios, Bühnen, Theater, Ausstellungen, Messen, Veranstaltungen, Themenparks, Unterhaltungslokale, Architekturbeleuchtung oder ähnliches GLOW UP STRIP 100...
  • Page 9 • 2006/95/EC - Safety of electrical equipment supplied at low voltage (LVD) • 199/5/EC – Requirements for radio equipment (R&TTE) • 2011/65/EU - Restriction of the use of certain hazardous substances (RoHS) • 2009/125/EC - EcoDesign requirements for Energy-related Products (ErP) GLOW UP STRIP 100...

  • Page 10: Informaciones De Suguridad Es

    EN 62471 El producto es concebido para ser utilizado en los siguientes ambientes: estudios, palcos, teatros, exposiciones, ferias, eventos, parques temáticos locales de entretenimiento, iluminación de arquitecturas y similares No es apropiado para la iluminación doméstica GLOW UP STRIP 100...
  • Page 11 • 2006/95/EC - Safety of electrical equipment supplied at low voltage (LVD) • 199/5/EC – Requirements for radio equipment (R&TTE) • 2011/65/EU - Restriction of the use of certain hazardous substances (RoHS) • 2009/125/EC - EcoDesign requirements for Energy-related Products (ErP) GLOW UP STRIP 100...

  • Page 12: Unpacking And Preparation

    UNPACKING AND PREPARATION IST003/001 2 x 183102/805 Packing content - Fig. 1 REMOVAL OF THE PROTECTIVE FILM INSTALLATION AND START-UP GLOW UP STRIP 100...
  • Page 13 WARNING: the safety chain must be installed except when the projector rests on the floor. (Code 105015/801 available upon request). This must be secured to the projector support structure and then hooked to the fastening point at the centre of the base. ontinued GLOW UP STRIP 100...

  • Page 14: Control Panel

    A terminating plug must be inserted on the last projector with a resistance of 120 (minimum 1/4 W) between terminals 2 and 3. IMPORTANT: The wires must not make contact with each other or with the metal casing of the connectors. The casing must be connected to the shield braid and pin 1 of the connectors. GLOW UP STRIP 100...
  • Page 15 The projector immediately turns on when the power cord is plugged in or, if used in battery mode, by pressing and holding down keys several seconds. Clay Paky GLOW UP STRIP 100 Address xxx BAT xx * see pag. 7 GLOW UP STRIP 100 Software release x.x x...

  • Page 16: Shortcut Keys Menu

    Colors menu (see table on page 8). It is possible to mix Strobo and Dimmer with any preset color channel. Sequence: it is possible to associate Speed and Fade of the pre-set Sequences (Preset 1,2,3) STOP DOWN key: deactivates the active programme. GLOW UP STRIP 100...

  • Page 17: Preset Colors For Stand Alone

    46 URBAN BLUE ROSCO 081 47 COOL BLUE ROSCO 066 48 LIGHT SALMON ROSCO 030 49 MAYAN SUN ROSCO 318 50 CHERRY ROSE ROSCO 332 51 FLESH PINK ROSCO 034 52 SKELTON EXOTIC SANGRIA ROSCO 039 GLOW UP STRIP 100...

  • Page 18: Menu Set

    FW Uploader Appl. Upload Boot. Upload Charge Informations BAT hour Discharge BAT hour Battery Monitor temperature Total LED hours System version DMX Monitor Reset Reset to SLV W Reset to DMX W Factory Reset CPU Reset Test GLOW UP STRIP 100...
  • Page 19 RDM discovery – to be used only when the wireless card is replaced; press ENTER to start the automatic search option. 3) Press ENTER to confirm the selection (the display blinks for several seconds) or SELECT to keep the current settings and return to the previous Menu. ontinued GLOW UP STRIP 100...
  • Page 20 2) Con i tasti UP e DOWN , abilitare ON o disabilitare OFF l'opzione. 3) Press ENTER to confirm the selection (the display blinks for several seconds) or SELECT to keep the current settings and return to the previous Menu. GLOW UP STRIP 100...
  • Page 21 Menu. LED CURRENT Battery This allows you to set an operating current value for the Glow UP Strip 100 Current Mode LED, whether it is running in Battery or PowerCon mode.
  • Page 22 SELECT to return to the previous menu. To reset the “Max Temperature” value, simultaneously press and hold down the UP and DOWN keys for several seconds. When “Rst?” (Reset) appears, confirm by pressing ENTER GLOW UP STRIP 100...
  • Page 23 Repeater -> Function -> Repeat & Play Repeater -> Direction -> Wirel. to Cable “DMX address” = 1 Display -> Off “Contrast” = 5 “MOD”-> Stand Alone/DMX Power Mode -> ''Mixed Mode'' ''Auto SwitchOff Opt. -> ''On'' GLOW UP STRIP 100...
  • Page 24 TEST or SELECT to keep current settings. Please pay attention to the document '' Firmware Revison History '' (www.claypaky.it) to verify if some change was introduced in the functions of the user Menu. GLOW UP STRIP 100...

  • Page 25: Operating Mode

    MMRX C (Play disabled) Wireless MMRX W Wireless to Cable + Repeat &Play MMRX W C Cable to Wireless + Repeat &Play MMRX C W Wireless to Cable + Repeater only Cable to Wireless + Repeater only GLOW UP STRIP 100...

  • Page 26: Rdm Controls Implemented For Glowup Series

    Saves the current temperature level RECORD_SENSORS 0x0202 Reads the text description of the model DEVICE_MODEL_DESCRIPTION 0x0080 AERIAL Aerial NOTES: To achieve best wireless performance, it is recommended to position GLOW UP with the aerial side facing the transmitter, when possible. GLOW UP STRIP 100...

  • Page 27: Maintenance

    2.5AT 250Vac (FUS000) Fuse 6,3x32mm 10AT 250Vac (030470) Replacing flight case fuses - Fig. 10 Each flight-case has 2 fuses associated with the main power cord connection and one fuse for each GLOW UP charge station. GLOW UP STRIP 100...
  • Page 28 2) Do not reuse GLOW UP after self-switch off as this indicates a low battery; recharge GLOW UP before using it again. 3) Do not leave the battery completely flat for over 5 days. 4) When not in use, recharge the battery at least every 4 months. ontinued GLOW UP STRIP 100...

  • Page 29: Optional Accessories

    • General cleaning of internal parts. • General visual check of internal parts, cabling, mechanical parts, etc. • Electrical, photometric and functional checks; eventual repairs. OPTIONAL ACCESSORIES C61460 C61461 C61460 - longitudinal elliptic diffuser C61461 - cross elliptic diffuser GLOW UP STRIP 100...

  • Page 30: Technical Data

    • Carica da Flight Case o con PowerCon Head adjustment • More than 2000 charge/deplete cycles 0 - 90° Input Power • No memory effect • 200 VA GLOW UP STRIP 100 • No acid leaks Cooling • 650 VA Flight Case Natural Convection Working position...

  • Page 31: Channel Functions

    CHANNEL FUNCTIONS GLOW UP STRIP 100 CHANNEL COMMON MODE SINGLE MODE GREEN GREEN BLUE BLUE WHITE WHITE DIMMER STROBE GREEN MACRO COLOR BLUE ZOOM WHITE DIMMER STROBE MACRO COLOR ZOOM ontinued GLOW UP STRIP 100...
  • Page 32 MAGENTA 2 DARK PINK LIGHT ROSE ORANGE 2 STRAW YELLOW 2 WHITE 2500 WHITE 3200 WARM WHITE COOL WHITE FULL WHITE SKY BLUE AQUAMARINE VIOLET PINK ORANGE WHITE MAGENTA CYAN YELLOW BLUE GREEN COLOUR EXCLUDED NONE GLOW UP STRIP 100...
  • Page 33 • ZOOM - channel 8 EFFECT WIDE BEAM NARROW BEAM ontinued GLOW UP STRIP 100...
  • Page 34 • BLUE - channel 3 • BLUE - channel 7 EFFECT EFFECT COLOUR INSERTED COLOUR INSERTED COLOUR EXCLUDED COLOUR EXCLUDED • WHITE - channel 4 • WHITE - channel 8 EFFECT EFFECT COLOUR INSERTED COLOUR INSERTED COLOUR EXCLUDED COLOUR EXCLUDED GLOW UP STRIP 100...
  • Page 35 BLUE 2 MAGENTA 2 DARK PINK LIGHT ROSE ORANGE 2 STRAW YELLOW 2 WHITE 2500 WHITE 3200 WARM WHITE COOL WHITE FULL WHITE SKY BLUE AQUAMARINE VIOLET PINK ORANGE WHITE MAGENTA CYAN YELLOW BLUE GREEN NONE GLOW UP STRIP 100...
  • Page 36 CLAY PAKY - Via Pastrengo, 3/b - 24068 Seriate (BG) Italy - Tel. +39-035-654311 - Fax +39-035-301876 - www.claypaky.it S.p.A.

This manual is also suitable for:

Glow-up cGlow-up twGlow-up wGlow-up strip 100Roxter-case glow-upRoxter-case glow-up strip 100 ... Show all

Table of Contents