Bosch WTVC SERIES Repair Instruction page 9

4.1.9 Broken belt switch
The broken belt switch prevents the dryer from running if the belt has
broken or been left disconnected.
pushing the left plunger in (viewing rear of dryer) – the dryer will not
run if the switch hasn't been reset.
702_58300000143767_ara_en_a
It must be manually reset (by
Push left plunger (toward
right) to reset broken belt
switch whenever drum or
belt has been removed for
any repair.
4.1.10 Air exhaust duct
Air exhaust duct connects to the fan and allows exhausting through
the rear of dryers. Using kits (sales accessories), dryers can be
vented out the bottom or right side.
Fan
4.1.11 Fascia (control) panel
Fascia panel includes the knob, which is factory built into the panel
and cannot be obtained separately.
separately.
Vent
Buttons can be obtained
Page 9 of 33