Maintenance - Bosch WTVC SERIES Repair Instruction

Table of Contents

Advertisement

S
tart/Pause
Fault
in program sequen
indicator light
malfunction.
doesn't
illuminate.
Anti
Crease/end
indicator
lights.
The display
shows 0:00.
Degree of
Moisture sensor dirty.
drying has not
been reached
Exhaust air duct is blocked or
or the drying
too long.
time is too
long.
Filter dirty.
Display may
indicate E:03.
Laundry was too wet.
Unsuitable program selected. Select suitable program and then
Maximum
drying
exceeded.
Motor limit temperature was
exceeded.
Degree of dryne
ss not set
correctly.
702_58300000121945_ara_en_a
ce or Turn of
f dryer, leave to cool
min. and then turn on
Restart program.
Clean moist
ure sensor, then turn
dryer off and
on again.
Clean exhaust air duct or shorten
it below maximum length allowed.
Turn dryer off and on again.
Clean filter and then turn dryer off
and on again
Spin laund
ry at higher speed in
the washing machine. Turn dryer
off and on again
turn dryer off and on again
time
Clean filter and exha
ust air duct.
Spin laundry at a higher speed in
your washer (to remove more
water).
Turn off dryer, leave to coo
l for 30
min. and then turn
dryer off and
on again.
Change settings for de
gree of
dryness.
for 30
5.6

Maintenance

again.
5.6.1
Cleaning lint filter
The lint filter should be cleaned after each use. The Filter light comes
on after each cycle and when the door is open (while the dryer is
running) to remind customers to clean the filter. An E:01 error code
occurs when dryer runs too hot due to clogged lint filter or exhaust
vent duct. When E:01 error code occurs:
1. Immediately stop dryer by rotating cycle selector knob to Off
position, then open door.
2. Remove and clean filter.
3. Replace filter and let dryer cool down.
4. Close door, then rotate cycle selector knob to desired cycle and
press Start/Pause button to restart dryer.
If the Filter light won't turn off, clean the lint
filter (by hand) with dish soap and water.
The lint filter is very fine and can be
clogged over time when fabric softener or
softener sheets are used.
Page 28 of 33

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents