Operating The Intonato; The Info Screen; Turning Bass Management On Or Off - JBL intonato dc Operation Manual

Operating the Intonato DC

The Info Screen

The Info screen is the first screen displayed after boot
up. Press the INFO button to return to the Info screen at
any time.
The Info screen displays monitor volume, aux output
volume, individual speaker solo/mute indication, clock
source, clock sample rate, and device status (clipping,
clock source errors, etc.).

Turning Bass Management On or Off

Press the BASS MGMT button to toggle bass
management on (LED lit) or off (LED off).
When turned off, the satellite speakers configured for
bass management will receive a full-range signal, and
the subwoofer(s) will not receive any bass managed
signal. Note that assigned LFE channels will still be
routed to the subwoofer(s).
NOTE: In order to use the bass management feature,
one or more subwoofers must be connected to and
configured in the Intonato 24 device. If no subwoofers
have been configured for bass management in the
Intonato 24 device, the BASS MGMT button should
not be used.
INTONATO DC Operation Manual
Operating the Intonato DC
CLK: CLK:
-21.0dB -21.0dB
Internal Internal
CLK: CLK:
Aux: -9dB Aux: -9dB
48000Hz 48000Hz
Solo: Off Solo: Off Status: Ok Status: Ok
Mute: Off Mute: Off
CLK: CLK:
-21.0dB -21.0dB
Internal Internal
CLK: CLK:
Aux: -9dB Aux: -9dB
48000Hz 48000Hz
Solo: Off Solo: Off Status: Ok Status: Ok
Mute: Off Mute: Off
Page 13