Scalping - Jacobsen AR522 Safety, Operation And Maintenance Manual

10 QUALITY OF CUT

10.4 SCALPING _______________________________________________________________

NOTE: Arrow indicates direction of travel.
Probable Cause
HOC (height-of-cut) settings are lower than normal.
Turf too uneven for the mower to follow.
Cutting too much grass at one time.
Mowing (ground) speed is too fast.
en-50
Scalping is a condition in which areas of grass are cut
noticeably shorter than the surrounding areas, resulting in
a light green or even brown patch. This is usually caused
by an excessively low height-of-cut setting and/or uneven
turf.
TN0222
Check and adjust the HOC settings.
Change mowing direction.
Mow more often.
Reduce mowing (ground) speed.
Remedy