Table of Contents
Advertisement
2.3.b
Installation
•
Installation and removal of the radio should be carried out only by experienced technicians. The information found in this
manual are meant solely as a complement to the experience held by the technician, who should assume full responsibility for
the installation.
•
This transceiver generates and irradiates electromagnetic energy (EME) at radio frequency (RF), and as such must be
installed and placed in operating conditions that are in conformity with the instructions contained in this manual and with
current regulations. Failure to follow these instructions can cause personal injury and/or serious malfunction of the device.
•
It is very important to follow the requirements relative to the prevention of radio frequency exposure. Unauthorized changes or
modifications to this device may invalidate conformity to regulations. All changes or modifications to the radio must be
approved in writing by the manufacturer.
•
Ensure that your power supply corresponds to the values cited in this manual. In case of doubt, contact your local vendor.
2.4 Assistance
We urge you to write the serial number of your transceiver in the space provided below. This number is found on
the transceiver's identifying label. This number will be useful in the event of repair/assistance and/or loss and/or
theft of the device.
Serial number_______________________
Rev. 2.0 on 1 March 2004
HM35 Series – User's Manual
Page 7 of 32
Advertisement
Table of Contents
