Table of Contents
Advertisement
10.1.d
Changing the channel scanning list
You can use this function to create a personalized scanning list and to set a priority channel that is different from the
pre-programmed one.
1) Ensure that scanning is not activated.
2) Press the menu/↵ button to access the command menu, then use the
3) Press menu/↵ to view the available sub-menus.
4) Press the
buttons until the
appear. Above the four function buttons, the following should also appear on the display:
padd
chadd
F1
5) Depending on what you would like to do, press the corresponding function button.
F2 Adding new channels to the list
1) Press the F2 (
chadd
) function key. You will see the first channel that is not inserted in the scanning list.
2) Press the
buttons until the channel you desire appears on the screen.
3) Press the menu/↵ button to memorize the channel in the scanning list.
4) Exit the sub-menu by pressing the F4/E
screen.
F3 Deleting channels from the list
1) Press the
buttons repeatedly until the channel you wish to delete from the scanning list has been selected.
2) Press the F3 (
chdel
) function key to remove the channel from the scanning list.
3) Exit the sub-menu by pressing the F4/E
screen.
F1 Changing the priority channel
1) Remove the current priority channel from the scanning list, following the procedure outlined above.
2) Remove the new channel that you wish to assign as the priority channel from the scanning list.
3) Press the F1 (
padd
) function key. You will see the first channel that is not inserted into the scanning list.
4) Press the
buttons until the channel you desire as priority appears on the screen.
5) Press the menu/↵ button twice to memorize the new priority channel and exit the scanning list.
6) If necessary, reinsert the old priority channel in the scanning list, following the procedure outlined above.
7) Exit the sub-menu by pressing the F4/E
screen.
10.2 Rapid recall of home channel
This function allows you to quickly recall the channel most frequently used (home channel).
1) Press the menu/↵ button to access the command menu, then use the
2) Press menu/↵ again to confirm the channel.
10.3 Locking microphone's keypad
If you use the MK06/35-K keypad microphone, you can lock its keypad in order to avoid sending accidental
commands during use.
1) Press the menu/↵ button to access the command menu, then use the
2) Press menu/↵ again to view the available sub-menus.
3) Press the
buttons repeatedly until the
4) Press menu/↵ to insert an
5) Exit the sub-menu by pressing the F4/E
screen. The
icon will appear on the display.
Rev. 2.0 on 1 March 2004
sub-menu is highlighted. The first channel added to the scanning list will
Edit List
chdel
F2
F3
button, then press it a second time to exit the main menu and return to the standby
SC
button, then press it a second time to exit the main menu and return to the standby
SC
button, then press it a second time to exit the main menu and return to the standby
SC
will appear on the display.
Keypad Lock
. The device's keypad will be deactivated.
button, then press it a second time to exit the main menu and return to the standby
SC
HM35 Series – User's Manual
buttons to highlight the
esc
F4/E
SC
buttons to highlight the
keys to highlight the
sub-menu is highlighted.
Scan
option.
Home Chan
option.
option.
Lcd&Keypad
Page 25 of 32
Advertisement
Table of Contents
