Table of Contents
Advertisement
6.7.b
Busy Channel Lock Out (BCLO)
Activation of this function impedes the use of the PTT button when the channel is busy.
Depending on the programming, the BCLO can act when it picks up any signal, or when a signal is coming from a
specific CTCSS/DCS signal.
This setting is not available by the end user. For further details, please contact your radio network administrator.
6.7.c
Selecting transmission power
Your transceiver can transmit with two different power levels, which are predefined during programming, channel by
channel. The display will always show the power selected, using the following icons:
•
- high power
•
- low power
1) Press the menu/↵ button to access the command menu, then use the
2) Press menu/↵ to view the available sub-menus.
3) Press the
buttons until the sub-menu
Hi
(high power) or
Lo
(low power).
4) Press menu/↵ to select the desired power level.
5) Exit the sub-menu by pressing the F4/E
screen.
Rev. 2.0 on 1 March 2004
Power
is highlighted. The display will show the power level currently selected:
button, then press it a second time to exit the main menu and return to the standby
SC
HM35 Series – User's Manual
buttons to highlight the
Radio Param
option.
Page 15 of 32
Advertisement
Table of Contents
