Advanced Menu - Getac S400 User Manual

Advanced Menu

The Advanced menu contains the advanced settings.
Information
P1 Function:
HDD Preheat:
USB Power Share
Any-Key Wake Up from S3:
Ring Wake-Up from S3
USB Wake-Up from S3
AC Initiation:
SATA Mode:
Wireless LAN:
Bluetooth:
F1 Help
↑↓
Esc Exit
←→
P1 Function specifies the P1 quick button function. When set to Quick Btn,
the P1 quick button serves as a user-defined quick launch key. When set to
Emergency Btn, the P1 quick button serves as the Emergency button.
"Emergency button" only works with customized applications that support
the specific button.
HDD Preheat keeps the hard disk drive's temperature above 5
during system shutdown period as long as external AC power is
connected. When set to Enabled, the optional heater will automatically
turn on whenever the hard disk drive's temperature drops below 5
(41 F). (The availability of this item depends on your model.)
o
USB Power Share allows the USB ports (on the left side of the computer) to
charge a connected USB device with a rechargeable battery.
Any-key Wake Up from S3 allows any key to wake up the system from S3
(Sleep) state.
Main Advanced
[
Quick Btn
[Disabled]
[Disabled]
[Disabled]
[Disabled]
[Disabled]
[Disabled]
[AHCI]
[Last State]
[Last State]
Select Item -/+
Select Menu Enter
Security Boot
Item Specific Help
]
Select P1 button act as
Quick launch button
Or Emergency button.
Change Values
Select  Sub-Menu
Using BIOS Setup and System Recovery
Exit
F9 Setup Defaults
F10 Save and Exit
C (41 F)
o o
C
o
5-5