Pc Card Problems - Getac S400 User Manual

You cannot eject a disc.
The disc is not properly seated in the drive. Manually release the disc
following the method described next:
1. Turn off the computer.
2. Insert a small rod, such as a straightened paperclip, into the drive's
manual eject hole and push firmly to release the tray.
3. Pull the tray out until fully extended, and then remove the disc.

PC Card Problems

The PC card does not work.
Make sure that the PC card is correctly seated.

If the card requires an IRQ (Interrupt ReQuest), make sure that there is

one available.
The PC card stops communicating properly.
The application may have been reset when the computer is turned off

or in Sleep mode. Exit and restart the application.
7-8
Troubleshooting