Using Smart Cards (Optional) - Getac S400 User Manual

Using Smart Cards (Optional)

Depending on the model, your computer has a smart card slot.
With an embedded microcontroller, smart cards have the unique ability
to store large amounts of data, carry out their own on-card functions (e.g.,
encryption and mutual authentication), and interact intelligently with a
smart card reader.
To insert a smart card:
1. Locate the smart card slot on the right of the computer and open the
cover.
2. Slide the smart card, with its label and embedded computer chip
facing down into the slot.
3. When a new card is seated, use the third-party smart card software to
allow your computer to read it.
To remove a smart card:
1. Make sure that the third-party smart card software is not accessing the
smart card.
2. Pull the card out of the slot.
4-8
Expanding Your Computer