Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Cineversum R599870
Summary of Contents for Cineversum R599870
- Page 1 R599870...
- Page 2 Changes Cineversum provides this manual ‘as is’ without warranty of any kind, either expressed or implied, including but not limited to the implied warranties or merchantability and fitness for a particular purpose. Cineversum may make improvements and/or changes to the product(s) and/or the program(s) described in this publication at any time without notice.
-
Page 3: Table Of Contents
7.4 Color Profiles ..........................26 INPUT SIGNAL 8.0 ........................8.1 Input Level ...........................27 8.2 Color Space ..........................27 8.3 Aspect ............................27 8.4 HDMI2 EDID ..........................27 3D CONTENT AND 3D PROjECTION 9.0 ................9.1 General Information about 3D playback ..................27 R599870 - Force 4K User Manual... - Page 4 15.0 MAINTENANCE ........................15.1 LEDs indicators ..........................35 15.2 Cleaning dust Filter ........................35 15.3 Dirt on the Lens ..........................36 16.0 APPENDIx ..........................16.1 RS-232C protocol .........................36 16.2 LAN Control..........................38 16.3 Infra Red, long hex-pronto compatible RCU ................39 16.4 Specifications..........................40 R599870 - Force 4K User Manual...
-
Page 5: Safety Instructions
Never spill liquid of any kind on the product. • Do not attempt to service this product yourself as opening or removing covers may expose you to dangerous voltages and other hazards. Refer all service to qualified service personnel. R599870 - Force 4K User Manual... -
Page 6: Laser Classification
IEC62471-5 labels located at the top front of this unit. As with any bright light source, do not stare into the beam when this unit is operating. This unit is rated RG2 from the IEC 62471-5 classification. R599870 - Force 4K User Manual... -
Page 7: European Specific Information
1.5 USA and Canada Specific Information FCC Information Changes or modification not approved by Cineversum could void the user’s authority to operate the equipment. Note: This equipment has been tested and found to comply with the limits for Class B digital devices, pursuant to Part 15 of the FCC Rules. -
Page 8: Installation Guidelines
Dirt that sticks to the optical components cannot be removed . 2.3 Maintain clearance from the wall Air flow As the unit discharges a large amount of heat, install it with adequate clearance from the surroundings as shown below. Air flow: A air inlets, B air outlets. R599870 - Force 4K User Manual... -
Page 9: Installing The Projection Screen
When using this unit at a location that is higher than 900m above sea level and making the air pressure low enough to decrease its efficacity cooling this unit, set the “High Altitude Mode” to “On”. R599870 - Force 4K User Manual... -
Page 10: Ceiling Mounting The Unit
• Regardless whether the unit is still under guarantee, Cineversum is not liable for any product damage caused by mounting the unit with third party ceiling mount or when the environment is not suitable for ceiling-mount. -
Page 11: Setting The Lens Offset
• Adjust the Picture Focus From the [Lens Control] menu, press the [Ok] button to access the Focus adjustment. Use the up and down buttons to adjust the picture focus R599870 - Force 4K User Manual... - Page 12 (horizontal and vertical shifts) of the projector. Once the position of the projector is determined by the smallest possible picture, double check that the larger one does not exceed the zoom capacity. R599870 - Force 4K User Manual...
-
Page 13: Remote Control Unit (Rcu)
If the remote control has to be brought closer to the projector to operate, it means that the batteries are wearing out. When this happens, replace the batteries. Always insert the batteries according to the + and - marks. R599870 - Force 4K User Manual... -
Page 14: Getting Started
Air Inlet and filters • Input Panel: connect your video source to the correct input. • Main Power terminal: connect the main power cord as shown below. • Back panel and operation buttons. R599870 - Force 4K User Manual... -
Page 15: Connecting The Power Cord
The HDMI 2.0 inputs are compatible with HDCP 2.2 and supports video signals up to 18 Gbps. It is strongly recommended to use exclusively cables rated for 18 Gbps bandwidth to watch 4K contents, otherwise this unit will suffer from handshake issues and video freezes. R599870 - Force 4K User Manual... -
Page 16: Connecting A Video Source To The Projector
ECO Mode turn to On prevents this unit to receive and to respond to automation commands when it is in standby. Turn Off ECO mode if you plan to take full control of this unit with an automation system. R599870 - Force 4K User Manual... -
Page 17: Back Panel And Operating Buttons
The Standby LED will switch from steady green to blinking red light and the fans will run for about 10 seconds to finish the shutdown procedure. During this Cool-down sequence, do not disconnect the power cord. The cool- R599870 - Force 4K User Manual... -
Page 18: Menu Structure
Advanced Color Temp If Custom 1-2, choose Correction Value Gain and Offset settings Reset Confirm Gamma If Color Profile is Film1 to 2 (standard) Film1 (more contrasted) Film2 Custom1 to 3 If Color Profile is THX R599870 - Force 4K User Manual... - Page 19 HDMI2 EDID (HDMI2 only) A, B Installation Installation Mode Mode Select Mode 1 - Mode 10 Name Edit Mode Copy Lens Control Focus Zoom Shift Image Pattern On, Off Lock On, Off Lens Center Confirm R599870 - Force 4K User Manual...
- Page 20 Display MAC Confirm Remote Code Press [Menu] + [Back] A, B Hide Mode Factory Reset Software Update Information Input Source Resolution H, V Freq Color Depth Colorimetry Light Source time Soft Version PS Version R599870 - Force 4K User Manual...
-
Page 21: Picture Adjust
• Film1 available with Film Picture Profile, uses the Xenon filter and adjusted to Eastman Kodak film tone • Film2 available with Film Picture Profile, uses the Xenon filter and adjusted to Fujifilm film tone. • THX color profile is reserved for the THX picture modes and THX standard. R599870 - Force 4K User Manual... -
Page 22: Advanced Picture Mode
• High Bright used for maximum brightness output available. • HDR saturated colors that matches HDR standards. • Custom 1 and Custom 2 that can be used to adjust color temperature to specific environment. R599870 - Force 4K User Manual... -
Page 23: Advanced Color Temperature
It allows a fine adjustment steps of the global picture brightness while maintaining the correct contrast level to keep good black and bright levels. Sets the overall exposure from -16 (under-exposed, darker) up to +16 (over- exposed, brighter) R599870 - Force 4K User Manual... -
Page 24: Multiple Pixel Control Level (Mpc Level)
Motion Enhance This setting enhances the responsiveness of each video frame by reducing the image blurring. • Off: correction is disable. • Low: this setting reduces image blurring. • High: stronger reduction of image blurring. R599870 - Force 4K User Manual... -
Page 25: Contrast
YES” in the Menu > Information Menu and the Gamma “HDR (ST.2084)” should be applied automatically. If your HDR image seems dull and without depth, this is probably because it doesn’t use the standard PQ Gamma R599870 - Force 4K User Manual... -
Page 26: Color Profiles
If the colors seem wrong with BT-2020 Color Profile, you can switch to a any existing Color Profile that would be more suitable such as Cinema with DCI-P3 colors or Film with REC-709 colors. R599870 - Force 4K User Manual... -
Page 27: Input Signal
Please stop watching if you do not feel well and consult a physician if necessary. People who already have a kind of photosensitivity, sufferers from heart disease, and people in poor physical condition should not watch 3D stereoscopic images. It is also recommended that you take a break periodically. R599870 - Force 4K User Manual... -
Page 28: Settings
9.3 operating the 3D Glasses (B) Power button Indicating LED (A) Optical Lenses (C) (B) Power button Indicating LED (A) (D) 3 positions button Optical Lenses (C) (E) micro USB slot RF 3D Glasses R599870 - Force 4K User Manual... -
Page 29: Installation
Once the Lens is correctly set, you may lock this setting menu by turning the Lens control Lock to On. Any attempt to access the Lens control menu will lead to the display of a warning message. Lens Center Reset the lens position to the original, central position. R599870 - Force 4K User Manual... -
Page 30: Pixel Adjust
• Mode A: The picture is vertically stretched to fit an installation with anamorphic lens. A cinemascope picture is stretched to completely fill the panels without black bands, using the optimum resolution and brightness. 2.35:1 source with lens Mode A with lens Anamorphic Mode A. R599870 - Force 4K User Manual... -
Page 31: Screen Adjust And Screen No
001 - 009: select a profile between 001 and 009 when watching 3D content with 3D shutter glasses. Profile 001 is recommended when using Cineversum’s active 3D glasses. b) 010 to 255: select the best compensation profile depending on your screen and environment. -
Page 32: Function
Confirm to start the update procedure. Make sure that a valid software file must be loaded on an USB stick and that this stick is fully inserted in the USB/Update input located at the rear of this unit. R599870 - Force 4K User Manual... -
Page 33: Information Menu
You can access directly on the remote control unit (RCU) only to the 3 first Installation Modes. If you need to access to more Modes, you must use the main Menu or access them through automation. R599870 - Force 4K User Manual... -
Page 34: Installing A 2.35:1 Screen With The Static Cinemascope Kit
2.35 screen Mode B 16:9 format 16:9 on 2.35 screen 2.35:1 format 2.35 on 2.35 screen Mode A Mode A When the source switches format..press [Anamo] button to obtain the correct anamorphic mode. R599870 - Force 4K User Manual... -
Page 35: Maintenance
If you need to replace the Air Filter (RZ201741) or Sponge Filter (RZ201742) because they are broken or if they are too dirty please contact your re-seller or the nearest Cineversum distributor. R599870 - Force 4K User Manual... -
Page 36: Dirt On The Lens
1 bit set to low X on/off None Flow Control None RS-232C pin assignation Signal Function Signal Direction receive data PC -> this unti transmit data this unit -> PC ground 1, 4, 6-9 R599870 - Force 4K User Manual... -
Page 37: Command Format
37h 33h 44h 38h Installation Mode 1 37h 33h 44h 39h Installation Mode 2 37h 33h 44h 41h Installation Mode 3 37h 33h 45h 35h Installation Mode 4 37h 33h 45h 36h Installation Mode 5 R599870 - Force 4K User Manual... -
Page 38: Lan Control
10000 is 2710h in hexa, converted in receive: 06h 89h 01h 4Ch 53h 0Ah ASCII characters: 32h 37h 31h 30h Then, reboot Network module send: 21h 89h 01h 4Ch 53h 52h 53h 0Ah receive: 06h 89h 01h 4Ch 53h 0Ah R599870 - Force 4K User Manual... -
Page 39: Infra Red, Long Hex-Pronto Compatible Rcu
003C 0014 0014 0014 003C 0014 0014 0014 003C 0014 0014 0014 0014 0014 0014 0014 0014 0014 0014 0014 0336 Ask your dealer for a complete device/function chart with their corresponding long hex commands. R599870 - Force 4K User Manual... -
Page 40: Specifications
3-CHIP LCOS SYSTEM LCoS is the abbreviation of Liquid Crystal on Silicon. The 3-Chip LCoS systems feature dedicated panels for each color channel and render seamless color graduations without any flickering or rainbow effect artifacts R599870 - Force 4K User Manual... - Page 41 APPENDIx Dimensions 28 cm 11.0” 59 cm 78 cm 23.2” 30.7” 12 cm 78 cm 29 cm 30.7” 44 cm 33,7 cm 59 cm 23.2” R599870 - Force 4K User Manual...
- Page 42 R599870 - Force 4K User Manual...
- Page 43 R599870 - Force 4K User Manual...
Need help?
Do you have a question about the R599870 and is the answer not in the manual?
Questions and answers