Cineversum Force one User Manual
  1. Manuals
  2. Brands
  3. Cineversum Manuals
  4. Projector
  5. Force one
  6. User manual

Cineversum Force one User Manual

Full-hd projector
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Force one and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Cineversum Force one

Summary of Contents for Cineversum Force one

  • Page 2 If the purchaser or third party caries out modifications or repairs on goods delivered by Cineversum, or if the goods are handle incorrectly, in particular if the systems are commissioned operated incorrectly or if, after the transfer of risks, the goods are subject to influences not agreed upon in the contract, all guarantee claims of the purchaser will...

  • Page 3: Table Of Contents

    ABLE OF ONTENTS SAFETY INSTRUCTIONS ..................... 5 INSTALLATION GUIDELINES ..................8 Packaging............................8 Air-Flow and Space Requirements ....................8 Lens Installation..........................9 Connecting the Line Cord........................9 Powering Up ............................ 10 Connecting a Source ........................10 Projector Distance, Offset Setting and Mounting ................11 Ceiling mounting the unit ........................
  • Page 4 10.0 MAINTENANCE......................78 10.1 Safety Warnings and Guidelines ...................... 78 10.2 Maintenance of the Cooling System ....................78 10.3 Maintenance of Optics ........................79 10.4 Replacing the Lamps ........................80 11.0 TROUBLESHOOTING ....................82 11.1 Power ............................... 82 11.2 Lamp ..............................82 11.3 LCD ..............................

  • Page 5: Safety Instructions

    1.0 SAFETY INSTRUCTIONS 1.0 SAFETY INSTRUCTIONS 1.1 Important information Lead-free regulation This product has a High Intensity Discharge (HID) lamp that contains a small amount of mercury. It also contains lead in some components. Disposal of these materials may be regulated in your community due to environmental considerations. For disposal or recycling information please contact your local authorities, or the Electronics Industries Alliance: http:// www.eiae.org.
  • Page 6 1.0 SAFETY INSTRUCTIONS temperature, as this causes condensation, which opening or removing covers may expose you to may result in fire, electric shock, or other dangerous voltages and other hazards. Refer all hazards. service to qualified service personnel. • Do not place this product on an unstable cart, •...

  • Page 7: Regional Specific Information

    FCC INFORMATION (USA ONLY) Changes or modification not approved by Cineversum could void the user’s authority to operate the equipment. Note: This equipment has been tested and found to comply with the limits for Class B digital devices, pursuant to Part 15 of the FCC Rules.

  • Page 8: Installation Guidelines

    2.0 INSTALLATION GUIDELINES 2.0 INSTALLATION GUIDELINES 2.1 Packaging Ensure the following components were received with the projector: • FORCE Series, Full-HD Projector with Built-In Keypad and LCD display • IR remote keypad (includes two 1.5V AA batteries and XLR to mini-stereo cable conversion to wired •...

  • Page 9: Lens Installation

    2.0 INSTALLATION GUIDELINES 2.3 Lens Installation Installing a projection lens The projection lens, shipped separately from the projector, must be installed prior to setting up the projector. Remove the lens plug from the lens opening in the projector before installing the lens. Retain the lens plug for projector transportation to protect the projector’s optical components from dust and debris.

  • Page 10: Powering Up

    2.0 INSTALLATION GUIDELINES NOTE: Voltage and current requirements are listed on the license label, located at the back of the projector. IMPORTANT Connect the projector's line cord to the AC receptacle at the AC inlet of the projector, then push the wire clip over the plug to retain it.

  • Page 11: Projector Distance, Offset Setting And Mounting

    2.0 INSTALLATION GUIDELINES 4) S-Video using two BNC cables, with Luma (Y) connected to 4 (Sy) and Chroma (C) connected to 6 (Sc). 2.7 Projector Distance, Offset Setting and Mounting Throw Distance Throw distance is the distance measured from your projector’s front feet to the screen. This calculation determines if there is enough room to install your projector with a desired screen size To estimate the throw distance take the horizontal width of the screen and multiply it by the lens throw ratio.

  • Page 12: Ceiling Mounting The Unit

    2.0 INSTALLATION GUIDELINES 21% x Base 60% x Height Base Screen (B) Maximum vertical and horizontal offsets Note: These values depend of the projection lens used. Refer to chart below or ask your dealer for more information. The horizontal position of the image can also be offset. The image is moved to the left or right of optical center. The amount of horizontal offset available depends on the lens installed and if the image has already been vertically offset.

  • Page 13: Adjusting Projector Height/Tilt

    filter may appear outside the unit. • Regardless whether the unit is still under guarantee, Cineversum is not liable for any product damage caused by mounting the unit with third party ceiling mount or when the environment is not suitable for ceiling-mount.
  • Page 14 2.0 INSTALLATION GUIDELINES adjustment color and focus adjustment color in the center of its range. Focus Setting focus using Remote Keypad. Zoom ZOOM Setting Zoom using Remote Keypad. 3) If necessary, center the image on the screen: If the projector is mounted off center to the screen axis, then offset the lens as much as required.

  • Page 15: Advanced Optical Alignment

    2.0 INSTALLATION GUIDELINES 2.11 Advanced Optical Alignment Boresight Alignment Procedure 1) Display the Boresight Test Pattern by pressing the TEST key on the remote keypad or use the built-in keypad and press the soft key that displays Test on the LCD display, then UP ARROW KEY to cycle to Boresight, then Enter, to obtain the Boresight pattern below.

  • Page 16: Powering Down

    2.0 INSTALLATION GUIDELINES or if the lens will not focus over the correct range of throw distances, then the boresight requires coarse adjustment, go to step 8. 8) The original factory boresight can be recovered approximately by positioning the 3 setscrews. Position the setscrews flush with the front face of the lens mount plate and in contact with the inner lens mount plate.

  • Page 17: Getting Started

    3.0 GETTING STARTED 3.0 GETTING STARTED 3.1 General View Projection lens LEDs Lamp doors Rear IR sencor Built-in Keypad with LCD screen Input panel Slots AC receptacle Cooling air vents Adjustable foot Rear Side view • Built-in Keypad The built-in keypad is located on the side of the projector. Use it similarly to the IR remote to control the projector. An LCD display is located above the keypad for displaying projector status.

  • Page 18: User Interface Overview

    3.0 GETTING STARTED • Adjustable feet Located on the underside of the projector are three adjustable feet. Raise or lower these feet when positioning the projector to ensure it is level on all sides so the displayed image will appear rectangular without any keystone.Refer to “Adjusting Projector Height/Tilt”, page 13 instructions on how to adjust the projector’s feet.
  • Page 19 3.0 GETTING STARTED Serial Port Connections RS-232 and RS-422, serial ports available on the projector: You can connect a device with a serial interface, such as a computer to either of these connectors (not both) and control the projector remotely by entering specific serial communication commands.
  • Page 20 3.0 GETTING STARTED Connecting Ethernet Ethernet Hub Connecting this unit wia the Ethernet connector. The default IP address is 192.168.1.89 Connecting Multiple Projectors RS-232 NETWORK: To connect multiple projectors in a network with serial communication: 1) Connect the controlling source to the RS-232 IN connector of the first projector in the network. 2) Using another serial communication cable, connect one end to the RS-232 OUT connector and the other end to the RS-232 IN connector of the next projector.
  • Page 21 3.0 GETTING STARTED below. NOTE: A wireless router can be used to communicate to the projectors via 802.11b/g. Proj1 CAT5 Proj2 CAT5 CAT5 Computer CAT5 Proj3 Ethernet Network setup • Setting the Projector’s IP address, subnet Mask and Gateway You can refer to “Ethernet Settings”, page 61 Changing the port number# On some Ethernet networks, firewall restrictions may require that the port number of the projector be changed from its default of 3002.

  • Page 22: Projector Communications

    3.0 GETTING STARTED 3.4 Projector Communications Status LEDs Looking from the back of the projector, the LEDs represent, from left to right Lamp 1, Lamp 2, Power and Shutter. The LEDs will display the colors as sho wn below: The Status LEDs are located at the back of the projector R599790 - FORCE Series User Manual...
  • Page 23 3.0 GETTING STARTED Projector state LEDs LED state Hard Boot All Leds amber - means please wait Lamp 1 & 2 Off - lamps are off Power AmberAC is present but projector is off Standby Mode Green - shutter is open Shutter Amber - shutter is closed Warm-up (Powering ON from standby)

  • Page 24: Connecting Sources

    4.0 CONNECTING SOURCES 4.0 CONNECTING SOURCES 4.1 Connecting a device to the projector Connect your source to an Input board inserted into one of the available nput slots located at the rear of the projector. Sources are connected to the Input Panel located at the back of the projector. The Input Panel allows one image processor board and up to 4 input cards to be inserted.

  • Page 25: Dual-Link Dvi Input Board

    4.0 CONNECTING SOURCES 4.4 Dual-link DVI Input Board This card accepts a single DVI signal with or without High-Bandwidth Digital Content Protection (HDCP) video signal over a DVI-I connector and analog video signals over the DVI-I or 15-pin VGA connector. The module can simultaneously support a digital signal on the DVI input and an analog signal on the VGA port, however it does not support 2 analog signals at the same time.
  • Page 26 4.0 CONNECTING SOURCES NOTE: The video decoder input card has 8 LED indicators. The PWR LED indicates that the module is installed properly, and has been successfully configured. The YPbPr LED indicates that a valid component signal has been detected on inputs 4, 5, and 6 (Component input grouping must also be selected in the projector’s menu). The remaining LEDs are each associated with one of the inputs, and indicate a valid signal has been detected on that input.

  • Page 27: Remote Control

    5.0 REMOTE CONTROL 5.0 REMOTE CONTROL This section describes the controls and switches used for basic projector operation once it is properly installed, aligned and configured. 5.1 Using the Remote Keypad or Built-In Keypad The projector is typically controlled using one of the following keypads: •...

  • Page 28: Remote Keypad Commands

    5.0 REMOTE CONTROL Display [Test] pattern Open or close [Shutter] Power Auto Test Shutter [Power] On or Off [Auto]matic image settings Focus Input Slots Slot 2 Slot 1 Select active [Input Slot] Lens control: Zoom [Focus], [Zoom] and [Offset] Slot 3 Slot 4 Lens H Select active [Input] on slot...
  • Page 29 5.0 REMOTE CONTROL • Auto Initiates an automated process in which the projector optimizes critical display parameters such as size, position, pixel tracking, etc., for the current source. These parameters are listed in table below. An auto setup can save time in perfecting a display and you can modify the adjustments as desired.
  • Page 30 5.0 REMOTE CONTROL good detail in dark areas when using the Gamma control. The nominal setting for Gamma Correction of 0 is correct for most signals and conditions. If excess ambient light washes out the image and it becomes difficult or impossible to see details in dark areas, increase the gamma correction setting to compensate.
  • Page 31 5.0 REMOTE CONTROL The number in the “Enter Number” window indicates which projector is currently listening to commands, and will match the projector number that has been defined in the Menu Preferences menu. The PROJ check box (read-only) shows whether or not the projector physically connected to a keypad is listening to commands from that keypad.
  • Page 32 5.0 REMOTE CONTROL Built-in Keypad LCD screen Soft Keys Navigation Keys Lens Key Power Key Menu Exit Lens Exit Key Menu Key Enter Input Key Auto Key Help Auto Input Shutter Shutter Key Help Key Built-in Keypad with LCD The built-in keypad has a LCD status display window which displays all states of the keypad controls. The LCD displays status information when the projector is powering up “Warm up: Lamp is warming up and when the projector is cooling down “Cool down: Lamp is cooling down.

  • Page 33: Menu And Picture Settings

    6.0 MENU AND PICTURE SETTINGS Always remains in the enabled state when the power is ON. If the power is off the Menu key is disabled. • Soft Key Used to select an action indicated by text above the key on the LCD. If no text is shown, the associated key is disabled.
  • Page 34 6.0 MENU AND PICTURE SETTINGS 2. Image Settings 6. Input Levels 11. Color Enable 7. Advanced Image Settings 1. Gamma Settings 1. Gamma Correction 2. Gamma 3. Gamma Function 4. Gamma Slope 2. Detail Settings 1. Detail 2. Texture Enhancement 3.
  • Page 35 6.0 MENU AND PICTURE SETTINGS 4. Configuration 3. Lens Settings 3. Calibrate 4. Lock all Lens Motors 5. Calibrate on New Lens 6. Calibrate on Startup 7. Home Position Calibration status 4. Power Management 1. LCD Backlight 2. LCD Backlght Timer 3.
  • Page 36 6.0 MENU AND PICTURE SETTINGS 4. Configuration 7. Communications 7. Broadcast Keys 8. Front IR Enabled 9. Rear IR Enabled 10. Wired Keypad Enabled 8. Geometry & Cplor 1. Test Pattern 2. Geometry Correction 1. Geometry Correction Enable? 2. Test Pattern 3.
  • Page 37 6.0 MENU AND PICTURE SETTINGS 4. Configuration 8. Geometry & Cplor 6. Color Saturation 1. Select Color Adjustment 2. Color Temperature 3. Red Color Adjustment 4. Green Color Adjustment 5. Blue Color Adjustment 6. White Color Adjustment 7. Yellow Notch Filter 8.
  • Page 38 6.0 MENU AND PICTURE SETTINGS 4. Configuration 11. Option Card Settings 3. Dual Link DVI Input Card (This menu will be filled with types 1. Dual Link Mode that match cards plugged in) 4. Twin HDMI Input Card 1. EDID Timings for Input 1 2.

  • Page 39: Main Menu

    6.0 MENU AND PICTURE SETTINGS 7. Input Switching & PIP 5. PIP Size & Position 5. Pixel Phase 6. PIP H-Position 7. PIP V-Position 8. PIP Blanking 1. Top Blank 2. Bottom Blank 3. Left Blank 4. Right Blank 6. PIP Image Settings 1.

  • Page 40: The Global Icon

    6.0 MENU AND PICTURE SETTINGS Main Menu 1. Size and Position 2. Image Settings 3. Channel Setup 4. Configuration 5. Lamp 6. Status 7. Input Switching & PIP 8. Language English 9. Test Pattern Main Menu With a function menu displayed, enter a menu option number for any numbered option, or use the UP/DOWN ARROW KEY to highlight the desired option and then press ENTER.

  • Page 41: Editing Text

    6.0 MENU AND PICTURE SETTINGS of key presses. Slide bars in menus The current value for a given parameter, such as size or vertical stretch, appears to the left of its slide bar icon (adjustment window). This number often expresses a percentage, or it may have units associated with it (such as pixels), depending on the specific option.
  • Page 42 6.0 MENU AND PICTURE SETTINGS Press RIGHT ARROW KEY to move the cursor forward or LEFT ARROW KEY to move the cursor backwards as desired. to move the cursor (highlight) my video to select and to scroll alphabet, go to next char. numbers, etc Entering Text Edit a character...

  • Page 43: Using Inputs And Channels

    7.0 USING INPUTS AND CHANNELS 7.0 USING INPUTS AND CHANNELS The projector stores and recalls up to 99 different channels (source setups) for a variety of inputs. This memory feature allows you to define and use a variety of customized setups. Depending on what you have defined, each physical source connection (i.e., input at the projector) can have several different channels associated with it.

  • Page 44: Channel Setup Menu

    7.0 USING INPUTS AND CHANNELS first channel with matching characteristics. Creating a New Channel To use a new source with the projector, a new channel must be created so that the projector will respond to an input signal from that source. A new channel can be created automatically, or it can be copied from an existing channel and then edited as necessary.
  • Page 45 7.0 USING INPUTS AND CHANNELS Composite Sync on the H/C input or the V input (4-wire). These abbreviations are preceded by either an ‘i’ (interlaced signals) or ‘p’ (progressive signal). Abbreviation Signal Type No-Sync Composite (4 wire) on HC input Composite (4 wire) on V input Sync-on-green (4 wire) Separate H,V (5-wire)
  • Page 46 7.0 USING INPUTS AND CHANNELS Operation submenu. Select Delete and press ENTER. A window will appear to confirm the deletion of this channel. Channel Setup ENTER iSVid 15.73kHz- i59.94-Hz- pDig 33.72kHz+ p29.07-Hz+ Select Channel Operation Edit Copy ENTER Delete Delete Unlocked Only Delete All Channels Do you wish to delete this channel setup? Delete Channel Setup...
  • Page 47 7.0 USING INPUTS AND CHANNELS define up to 99 channels. Slot 1-4, corresponding to which slot in the projector’s input panel the source is connected: Input 1-6, corresponding to which input on the selected slot the source is connected to. In Menu If checked (default, except for automatically defined channels with unchanged parameters), this defined channel will then appear in the list available when CHANNEL key is pressed.

  • Page 48: Adjusting The Image

    8.0 ADJUSTING THE IMAGE 8.0 ADJUSTING THE IMAGE The most commonly used options for image adjustments are accessed through two menus: Size and Position (MENU 1) and Image Settings (MENU 2), both of which appear in the Main menu. From either of these two menus. You can change settings affecting the image from the current channel by working with the appropriate slide bars, check boxes and pull-down lists.

  • Page 49: Resize Presets

    8.0 ADJUSTING THE IMAGE Size and Position 1. Resize Preset No Resizing 2. Size 0.729 3. Vertical Stretch 1.000 4. Pixel Track 5. Pixel Phase 6. H-Position 7. V-Position 8. Keep Aspect on Auto Setup 9. Blanking Size and Position Menu Resize Presets Resize Presets will display an image in its native resolution (no resizing) or will resize the image by maximizing either the height, width or both height and width, or will resize to the maximum size possible while keeping the...

  • Page 50: Vertical Stretch

    8.0 ADJUSTING THE IMAGE Size Controls both the image width and height in tandem, maintaining the current aspect ratio of the displayed signal data. Vertical Stretch Adjusts the height of the image while keeping the width constant. Use “Vertical Stretch” to change the aspect ratio of the display.

  • Page 51: Image Settings Menu

    8.0 ADJUSTING THE IMAGE factors. Blanking of a primary image. NOTE: Blanking a PIP image resembles zoom. For example, left Blanking zooms the right side of the PIP image; Right Blanking zooms the left side. There are no black bars. Blanking of a PIP image is similar to a zoom function.

  • Page 52: Video Standard

    8.0 ADJUSTING THE IMAGE • Select YPbPr (Video) with a standard definition televised signal (SDTV). • Select YPbPr (HDTV) with a high definition televised signal (HDTV). NOTE: When certain RGB signals are first connected, the projector may not recognize them as RGB and will incorrectly decode their color information as YPbPr (video).

  • Page 53: Sampling Mode

    8.0 ADJUSTING THE IMAGE The proper filter setting is automatically set for virtually all signals, and rarely needs to be changed. Override only if standard pixel tracking and phase adjustments do not adequately clear up a “noisy” video signal, or if a graphics signal appears overly “soft”.
  • Page 54 8.0 ADJUSTING THE IMAGE Good RGB or input levels—that is, the drives and black levels for each of the three colors, red, green and blue— ensure that images from analog sources other than decoded video have maximum contrast without crushing black or white.

  • Page 55: Color Enable

    8.0 ADJUSTING THE IMAGE correct blacks and whites without crushing. See figure Adjusting Input Levels Using the Peak Detector below. 1) Display a 16 level grayscale test pattern from the desired external source, and enter a checkmark in the Input Peak Detector check box.
  • Page 56 8.0 ADJUSTING THE IMAGE NOTE: A separate PC utility is needed to do this. The 2.22 curve is a power curve typically used to encode graphics and video sources. The 'standard' curve (auto setup default) is a modified 2.22 curve with a small linear section in the black that enhances the detail in darker areas of the projected content.

  • Page 57: Dynamic Iris

    8.0 ADJUSTING THE IMAGE Standard settings are: • 9300K, is close to the white of many computer monitors • 6500K, is the standard for color video, in both standard and high definition forms • 5400K, is a standard for graphics and black and white video •...

  • Page 58: Configuration Menu

    8.0 ADJUSTING THE IMAGE on the average level of brightness in the scene, and the setting of this control. The brighter the scene the less impact this control will have. It is often best to adjust the sensitivity and white compression together to find the optimal settings.
  • Page 59 8.0 ADJUSTING THE IMAGE Output2. Selecting Disable will shut off the HDMI outputs completely. • Fade to Black Time This control sets the amount of time (in seconds) that it takes to fade the image to/from black. NOTE: The OSD only allows the fade time to be set.

  • Page 60: Menu Preferences

    8.0 ADJUSTING THE IMAGE This sets the activation interval (in minutes) for Auto Shutdown. If all activity (input signals, web or serial port activity, key presses) is lost for this length of time, and Auto Shutdown is enabled, an Auto Shutdown cycle will begin. •...
  • Page 61 8.0 ADJUSTING THE IMAGE NOTE: Only one user splash screen can be saved in the projector. • OSD Transparency Check this box if you want the OSD menu backgrounds to be transparent. • Menu Type Select the Basic or Advanced menu type from this list box. The Advanced menu setting will give the menu options. The Basic menu setting will give a small number of the most frequently used menu items.

  • Page 62: Test Pattern

    8.0 ADJUSTING THE IMAGE Subnet Mask determines the subnet for the IP address and must be set manually. • DEFAULT GATEWAY This is the IP address of the gateway used to reach any non-local IP addresses; it must be set manually. •...
  • Page 63 8.0 ADJUSTING THE IMAGE 2D keystone settings are adjusted. 4) When adjustment of the corners is complete, select OK. NOTE: A message will be displayed indicating that the projector is “Processing request”. The settings are applied to the displayed image, and will take approximately 10 seconds.
  • Page 64 8.0 ADJUSTING THE IMAGE maintaining a good overall match of light output from screen-to-screen. By nature, achieving a uniform brightness will require a slightly reduced overall brightness—this reduction will help ensure that you have enough range of adjustment when examining brightness variables more closely from screen-toscreen, and will help prevent premature “maxing out”...

  • Page 65: Preliminary Calibration

    8.0 ADJUSTING THE IMAGE • FREEZE IMAGE DURING AUTO SETUP If selected, this will hide temporary image artifacts that may appear during the auto setup procedure. Option Card Settings - Submenu Allows adjustment of any settings specific to each option card that is currently installed in the projector. Dynamic Iris Refer to “Dynamic Iris”, page 57.

  • Page 66: Using The Color Saturation Menu For Color Matching

    8.0 ADJUSTING THE IMAGE CIE 1931 Chromacity Diagram (without Yellow Notch Filter) NOTE: Keep new x,y coordinates within the original color gamut triangle shown here. Color Saturation - Submenu Adjust color slide bars and judge image color by eye or meter. A user-defined color “adjustment” can be applied by selecting it in the Advanced Image Settings menu (select ‘Color Adjustment’).

  • Page 67: Input Switching & Pip Menu

    8.0 ADJUSTING THE IMAGE this menu after doing the color adjustment procedure. 8.6 Input Switching & PIP Menu Use the Input Switching & PIP menu to enable and define how you want to use PIP. NOTE: To control the primary image, access all picture controls through the Main menu. To control the secondary (PIP) image, access picture controls through the Input Switching &...

  • Page 68: Lamp Menu

    8.0 ADJUSTING THE IMAGE Frame Locking This option allows the projector to control the output frame timing based on the input signal. The Frame Lock option forces (if possible) the output image to be phase locked to the input frames. When Frame Locked, the output is always locked to the primary input, and never to the PIP image.

  • Page 69: Status Menu

    8.0 ADJUSTING THE IMAGE Set the lamp’s power in Watts. The Power control represents the amount of power sent to the lamp(s). Power increases when operating in Intensity mode, until it reaches its maximum. The value remains stable when in Max Brightness or Power mode.

  • Page 70: Alarm Conditions

    8.0 ADJUSTING THE IMAGE of the projector can be controlled from this interface and the Virtual OSD can be accessed from here. 8.10 Alarm Conditions An alarm condition consists of a message that is on the LCD display located beside the built-in keypad. There are two types of alarm conditions: •...

  • Page 71: Web User Interface

    9.0 WEB USER INTERFACE 9.0 WEB USER INTERFACE 9.1 Logging On IMPORTANT Before logging on to the system, ensure that you select the appropriate language required. Your language selection only affects the web user interface. The language used by the projector’s on-screen display (OSD) is not affected. 1) Open your web browser and type the IP address (in the address bar) assigned to your projector.

  • Page 72: Navigating The Web User Interface

    9.0 WEB USER INTERFACE These sections provide drop down list Power Section. To power ON or OFF this selection (refer to next chapter for more unit. Only one button is enable. details) Primary Tabs located along the top of the Shutter Section.
  • Page 73 9.0 WEB USER INTERFACE detailed information, refer to “Lens Installation”, page 9 Tools Tabbed Page - Virtual OSD Under the Tools tabbed page, select the Virtual OSD secondary tab to access to the virtual OSD page. See Figure below. Tools Window OSD Section contains an ON/OFF Virtual OSD tabbed page presents the button.
  • Page 74 9.0 WEB USER INTERFACE Clock Setting 1) Click within the field (i.e. Lamp Regeneration Start Time option) to allow access. 2) Change the Hour, Minute, and Seconds fields (double-digit field entry) as required. Admin Tabbed Page - System Under the Admin tabbed page, select the System secondary tab to upgrade, upload, backup and restore specific files, change the Logo position, background color, gamma properties, and select the interrogation level.
  • Page 75 9.0 WEB USER INTERFACE a. Enter the Logo position for the X and Y fields. b. Click the Color square to open the Choose Background Color window, choose the desired background color from the color palette, and click OK. The color square changes to the selected color. c.
  • Page 76 9.0 WEB USER INTERFACE NOTE: The scheduled tab is always selected by default on add. Scheduled Event Window 3) Select the frequency option for the event by selecting either Once, Daily, Weekly, or Monthly. NOTE: End Date is enabled when Daily, Weekly or Monthly repeat options are selected. 4) Click within the Start Time field to open a calendar pop-up window.
  • Page 77 9.0 WEB USER INTERFACE Active column accordingly. RTE Listing Window • To add a System Event 1) Click Add to open the RTE Wizard. 2) Select the System Event tab. 3) Select a type of event from the System Event drop-down list. NOTE: Depending on the selection made, additional selections are made available in the second drop-down list located underneath (i.e.

  • Page 78: Maintenance

    10.0 MAINTENANCE 10.0MAINTENANCE Installers, service trained operators and all other users must maintain a safe operating environment at all times. Read through this section in its entirety and understand all warnings and precautions before attempting to operate this projector. DANGER Always power down the projector and disconnect all power sources before servicing or cleaning.

  • Page 79: Maintenance Of Optics

    10.0 MAINTENANCE The high-intensity lamps and electronics rely on a properly functioning cooling system. Regular maintenance of the cooling system is critical to prevent overheating and sudden projector failure and helps ensure reliable operation. Ventilation Vents and louvers in the projector covers provide ventilation, both for intake and exhaust. Never block or cover these openings.

  • Page 80: Replacing The Lamps

    10.0 MAINTENANCE periodically in a clean, dust-free environment using a flashlight. Never touch an optical surface with your bare hands. Always wear latex lab gloves. Supplies or Cleaning Optical Surfaces • Soft camel-hair brush • Dust-free blower - filtered dry nitrogen blown through an anti-static nozzle. •...

  • Page 81: Install The New Lamp

    10.0 MAINTENANCE To use lamp OFF command • In the lamp menu, select CHANGE LAMP. This will prompt for the old lamp serial number (if it was not previously entered). • Enter the new lamp serial number. NOTE: This action is not mandatory, it is recommended for accurate lamp statistics to be archived.

  • Page 82: Troubleshooting

    11.0 TROUBLESHOOTING 11.0TROUBLESHOOTING If the projector is not operating properly, note the symptoms and use this section as a guide to resolve the problem. If the problem cannot be resolved, contact your dealer for assistance. 11.1 Power Projector Does Not Power ON 1.

  • Page 83: Osd

    11.0 TROUBLESHOOTING and go to the Main Menu>Configuration>Communication submenu and check the check boxes for Front IR Enabled and Rear IR Enabled are checked. Enable them if they were disabled and try again. 4. Projector is busy. If the projector is busy in a warm-up mode or in a cool-down mode, the commands from the remote keypad may be ignored.

  • Page 84: Web Interface

    11.0 TROUBLESHOOTING The Upper Portion of the Display is Waving, Tearing or Jittering This can occur with video or VCR sources. Check your source. Portions of the Display are Cut Off or Warped to the Opposite edge Resizing may need adjustment. Adjust until entire image is visible and centered. Display Appears Compressed (Vertically Stretched) 1.

  • Page 85: Appendix: Specifications

    PECIFICATIONS 12.0A PPENDIX PECIFICATIONS 12.1 Key features • Up to 6,000 lumens (FORCE One) and 10,000 lumens (FORCE Two) • Full-HD (1920x1080) resolution • Dual Mercury lamp illumination at 200W or 350W • Dynamic iris contrast aperture providing up to 10,000:1 contrast ratio •...

  • Page 86: Color Temperature

    12.0 A PPENDIX PECIFICATIONS ANSI 9 point measurement without Yellow Notch Filter x y: 0.665 ± .025 0.335 ± .025 Green 0.343 ± .040 0.640 ± .040 Blue 0.145 ± .020 0.050 ± .025 White 0.300 ± .050 0.045 ±.025 ANSI 9 point measurement with Yellow Notch Filter x y 0.670 ±.025 0.330 ±...

  • Page 87: Automatic Fans

    12.0 A PPENDIX PECIFICATIONS • Travel time stop to stop 1) Zoom and Focus 10 sec nominal (depends on lens type) 2) Offsets 5 sec (nominal (depends on lens type) • Manual Lens Movement Manual over-ride permissible for zoom and focus Dynamic Iris •...

  • Page 88: Operating Conditions

    Arbitrary Gamma 12.3 Operating Conditions Power Consumption • FORCE One: 870W / 9A @ 200W dual lamp - 610W single lamp • FORCE Two: 1320W/13A @ 350W dual lamp - 850W single lamp Line frequency 50/60 Hz Type of connector IEC 320-C14 with wire cable clamp Operating Position Horizontal ±20 degrees allowable rotation about lens axis...

  • Page 89: Appendix: Inputs And Signal Compatibility

    13.0 A PPENDIX NPUTS AND IGNAL OMPATIBILITY 13.0 A PPENDIX NPUTS AND IGNAL OMPATIBILITY 13.1 Analog (Only) Input Connectors: 5 female BNC, 75 Ohm • R/Pr • • B/Pb • • Color spaces/signal types: • • YPbPr 13.2 Twin HDMI Input Connectors: •...

  • Page 90: Ethernet

    13.0 A PPENDIX NPUTS AND IGNAL OMPATIBILITY • Dual HD input • SDI, HDSDI 13.6 RS-232 Number of ports: 2 • Connector 1 female 9-pin Dsub (IN) • 1 male 9-pin Dsub (OUT) Max bit rate 115.2 kbps Flow control Xon/Xoff 13.7 RS-422 Number of ports: 1: Connector 1 female 9-pin Dsub Max bit rate 115.2 kbps...

  • Page 91: Appendix: Gpio

    14.0 A : GPIO PPENDIX 14.0A : GPIO PPENDIX This section explains how to use a GPIO link from the projector to external equipment, such as devices for 3D synchronizing. 14.1 GPIO Port The GPIO connector located on the input panel provides a flexible method of interfacing a wide range of external I/O devices to the projector.
  • Page 92 14.0 A : GPIO PPENDIX closing event. Open (0 or Low) Closed (1 or High) • Examples: Turn room lighting on when the projector is turned off. (Assumes a control/automation unit is configured to turn the lights on when pin 2 of its input goes high.) (GIO+CNFG “OOOllll”) Set pin #2, 3 &...

  • Page 93: Appendix: Projection Distances

    15.0 A PPENDIX ROJECTION ISTANCES 15.0A PPENDIX ROJECTION ISTANCES The projection distance are calculated from the middle of the front feet of the projector to the projection screen. 15.1 ABSOLUTE HD LENS 0.67:1 Projection Screen Size Projection Screen Size Projection Screen ABSOLUTE HD LENS Diagonal size Base size...

  • Page 94: Absolute Hd Lens 1.16 To 1.49:1

    15.0 A PPENDIX ROJECTION ISTANCES 15.3 ABSOLUTE HD LENS 1.16 to 1.49:1 Projection Screen Size Projection Screen Size Projection Screen ABSOLUTE HD LENS Diagonal size Base size Height ZOOM 1.16:1.49:1 (Aspect Ratio 16:9) (Aspect Ratio 16:9) (Aspect Ratio 16:9) Projecting Distance minimum - maximum 92"...

  • Page 95: Absolute Hd Lens 1.8 To 2.6:1

    15.0 A PPENDIX ROJECTION ISTANCES 15.5 ABSOLUTE HD LENS 1.8 to 2.6:1 Projection Screen Size Projection Screen Size Projection Screen ABSOLUTE HD LENS Diagonal size Base size Height ZOOM 1.8-2.6:1 (Aspect Ratio 16:9) (Aspect Ratio 16:9) (Aspect Ratio 16:9) Projecting Distance minimum - maximum 34,6 m 68"...

  • Page 96: Absolute Hd Lens 4.1 To 6.9:1

    15.0 A PPENDIX ROJECTION ISTANCES 15.7 ABSOLUTE HD LENS 4.1 to 6.9:1 Projection Screen Size Projection Screen Size Projection Screen ABSOLUTE HD LENS Diagonal size Base size Height ZOOM 4.1-6.9:1 (Aspect Ratio 16:9) (Aspect Ratio 16:9) (Aspect Ratio 16:9) Projecting Distance minimum - maximum 134 m 76"...

  • Page 97: Appendix: Dimensions

    16.0 A PPENDIX IMENSIONS 16.0 A PPENDIX IMENSIONS 565 mm 590 mm 22.3’’ 23.2’’ Ext. 565 mm 22.3’’ R599790 - FORCE Series User Manual...
  • Page 98 16.0 A PPENDIX IMENSIONS Contact Information: TEC - Cineversum 7, rue La CAILLE, 75017 Paris - FRANCE Web: www.cineversum.com R599790 - FORCE Series User Manual...
  • Page 99 16.0 A PPENDIX IMENSIONS R599790 - FORCE Series User Manual...

This manual is also suitable for:

Force two

Table of Contents