Table of Contents
Advertisement
Reinstall Synology NAS
If you want to reinstall your Synology NAS without losing its data, you can use the
panel.
To reinstall Synology NAS:
1 Press and hold the
RESET
2 Within the next 10 seconds, press and hold
beep sound.
3 Follow the installation instructions in the Quick Installation Guide for your model available at Synology's
Download Center
to set up the Synology NAS.
Important:
The data saved on the Synology NAS will not be erased during the reinstallation. However, for security
reason, we strongly recommend that you back up the data first.
Enable SNMP Service
Go to
Control Panel
>
Terminal & SNMP
network flow with the network management software.
Enable Terminal Services
Go to
Control Panel
>
Terminal & SNMP
log in to Synology NAS and modify its settings.
Important:
Use the Terminal service with caution. Improper manipulation or modification to Synology NAS may result
in system malfunction or data loss.
24 Chapter 4: Perform Advanced Management Tasks
button for about 4 seconds until the Synology NAS emits a beep sound.
RESET
button for about 4 seconds until the Synology NAS emits a
to enable SNMP service, which allows users to monitor Synology NAS
to enable Terminal service, which allows you to use Telnet or SSH to
Synology NAS User's Guide
Based on DSM 6.1
RESET
button on the back
Hide quick links:
Advertisement
Chapters
Table of Contents
