Physical Installation - D-Link DAP-3662 Quick Installation Manual

Physical Installation

STEP 1: Connect an Ethernet Cable
to the LAN1 (PoE) Port on the AP.
STEP 2: Mount the AP to a Pole or
Wall
2A: Mounting The DAP-3662 On A
Pole
Secure mount base to the pole with two
stainless tie back strap sets. Ensure that the tie
back is locked securely.
Align the DAP-3662 with the mounting plate
D-Link DAP-3662 Quick Install Guide
Once aligned, slide the device down so that
the mounting plate securely locks into the
DAP-3662
2B: Mounting The DAP-3662 On A
Wall
Securely mount the base to the wall using
wall plug and wall screw.
Align the DAP-3662 with the mounting plate
3
3