Download Print this page

Quick Install Guide; Minimum System Requirements; Package Contents - D-Link DAP-3662 Quick Installation Manual

Wireless ac1200 concurrent dual band outdoor poe access point
Hide thumbs Also See for DAP-3662:

Advertisement

Important Information
This product should ONLY be installed by
an experienced installer who is familiar with
local building and safety codes and, where
applicable, is licensed by the appropriate
authorities. Failure to employ an experienced
installer may render the D-Link product
warranty void and may also expose the end
user or the service provider to legal and
financial liabilities. D-Link and its resellers or
distributors expressly disclaim any and all
liabilities for injury, damage, or violation of
regulations due to the improper installation of
outdoor units or antennas.
A safety grounding system is necessary
to protect your outdoor installation from
lightning strikes and the build-up of static
electricity. Direct grounding of an outdoor AP is
very important and can protect your networks
from brutal outdoor environments and
devastating ESD attacks. The grounding system
must comply with the National Electrical Code
and safety standards that apply in your country
and/or region. Always check with a qualified
electrician if you are in doubt as to whether
your outdoor installation is properly grounded.

Quick Install Guide

This
installation
instructions for installing the DAP-3662 Wireless
AC1200 Concurrent Dual Band Outdoor PoE
Access Point on your network. For additional
information about how to use the Access Point,
please see the datasheet and user manual from
the D-Link support website.
2
2
guide
provides
basic
Minimum System
Requirements
Computer with Windows, MAC OS, or Linux-
based operating system, and an Ethernet
adapter installed
Internet Explorer 7.0, Mozilla Firefox®
-
version 12.0, Safari 4.0, or Chrome 20.0 or
newer

Package Contents

DAP-3662 Wireless AC1200 Concurrent
-
Dual Band Outdoor PoE Access Point
Installation CD-ROM
-
Quick Installation Guide
-
PoE Injector
-
-
Power Adapter (48 V/ 0.5 A)
-
Mounting kit (Wall/Pole Mount)
-
Stainless steel mount base x 1
-
Stainless tie back straps x 2
-
Wall screw x 4
-
Wall plug x4
Stainless mount screw (hexagonal hole) x1
-
Hexagon Socket Spanner
-
Two LAN Port Waterproof Enclosure
-
Grounding Wire
-
If any of the above items are missing, please
contact your reseller.
Using a power supply with a different voltage rating or
1
PoE injector than the one included with the DAP-3662
will cause damage and void the warranty for this product.
D-Link DAP-3662 Quick Install Guide
1

Advertisement

loading