Installing Onie; Installing Onie On Cnos - Lenovo ThinkSystem NE1032 Quick Start Manual

Installing ONIE

Installing ONIE on CNOS

1. Download an ONIE image for the switch from the following link:
2. Upload the ONIE image to a local server or a USB drive.
3. Connect to the switch using the mini-USB serial console port. For more details, see
4. After connecting to the switch, enter Privileged EXEC configuration mode:
5. Use one of the following commands to copy the ONIE image:
14
Lenovo ONIE Quick Start Guide for NE1032
Only after you successfully install the appropriate FoD license key, you are able to
install ONIE on the switch. For more details, see
Key" on page 12.
To install ONIE on the switch running Cloud NOS, use the following steps:
Note: The commands used to install ONIE on the switch display an error if the
ONIE license key is not installed.
http://support.lenovo.com/
For CNOS, the ONIE image is called Lenovo ThinkSystem NE1032
RackSwitch [ONIE] v10.x.x.0.
"Connecting to the NE1032" on page
NE1032> enable
NE1032#
 using FTP, SCP, SFTP, or TFTP:
cp ftp <FTP URL> system-image onie [vrf management]

cp scp <SCP URL> system-image onie [vrf management]

cp sftp <SFTP URL> system-image onie [vrf management]

cp tftp <TFTP URL> system-image onie [vrf management]

using a USB drive:

cp usb1 <file path> system-image onie [vrf management]

"Installing the ONIE FoD License
6.