User Settings Ventilation; Filter Settings - nilan CTS700 touch User Manual

User settings
Ventilation

Filter settings

The filter alarm has a timer which is set at the factory to give 90 days between filter changes.
Supply air filters and extract air filters are set separately. The unit leaves the factory with a G4
standard filter, but an F7 pollen filter can be purchased for the outdoor air. The service life of the two
types of filter differs.
Ventilation
Filter settings
↳ Set ventilation on pause
↳ Outdoor air filter
↳ Filter change warning
↳ Days between filter change
↳ Days to next filter change
↳ Reset timer
↳ Extract filter
Compact P / Compact P Polar (English)
Settings:
Standard setting:
Description:
Settings:
Standard setting:
Description:
Settings:
Standard setting:
Description:
Description:
Description:
Same settings options as
for the outdoor air filter
On / Off
Off
Before opening the unit to change the filter, turn off
the ventilation.
If you forget to turn on the ventilation again, it will
automatically restart after 2 hours:
None / Digital / Timer
Timer
Settings performed by the installer
30 ↔ 180 days
90 days
Number of days between filter changes can be set as
required.
It is important that filters are clean, to give optimum
operation and low power consumption. Dirty filters
reduce production of domestic hot water.
Shows how many days remain to the next filter change.
Press to reset timer
BY NILAN
17