Bridge Status Screen; Figure 12 Username And Password Screen; Figure 13 Bridge Status Screen - Redline Access Node-50 User Manual

AN-50 User Manual
An example of the username and password screen is shown in Figure 12. The
default value (set from the factory) for both username and password is 'admin'.
Refer to the Change Password screen to change this value for future sessions.
Also, note that the User Name cannot be changed from admin.

Figure 12 Username and password screen.

6.2.

Bridge Status Screen

Clicking on Status in the main menu will bring up the Bridge Status screen. This
screen provides a status on General Info, Ethernet LAN statistics and Wireless
Statistics, as shown in Figure 13.

Figure 13 Bridge status screen.

22/52
Redline Communications .....solving the first mile challenge.