The An-50 Transceiver/Antenna At A Glance; Figure 2 Antenna/Transceiver Close Up - Redline Access Node-50 User Manual

The rear of the terminal comprises two interfaces; the power cord interface, and
F-Type female connector to which the IF cable attaches.
4.2.

The AN-50 Transceiver/Antenna at a Glance

The AN-50 transceiver is mounted to the back of the flat plate antenna, as shown
in Figure 2. The antenna features a bracket to mount onto a 1-inch pole.
The pole is approximately three (3) feet in length and features a curve profile to
facilitate protruding building infrastructures, such as eaves. A mounting bracket
at the bottom of the pole is used to attach the antenna to sides of buildings or onto
other poles of varying diameters.
Before connecting the AN-50 system, it is important to review the important
safety tips provided in the beginning of this manual.
Redline Communications
CAT 5
STP
Cable
Transceiver
Flat
Plate
Antenna
Mounting
Bracket
Front
View

Figure 2 Antenna/Transceiver close up.

11/52
AN-50 User Manual
Third Party
Switch/Router
Pole
Back
View
.....solving the first mile challenge.
To Core
Network