Sony CMT-GP6V Operating Instructions Manual page 7

Note
Keep the antennas away from the speaker cords.
3 Connect the video input jack of your TV
to the VIDEO OUT jack with the
supplied video cord.
When using a TV
Turn on the TV and select the video input so you can
view the pictures from this system.
4 Set the color system to PAL or NTSC
depending on the color system of your
TV.
AUTO
NTSC
The color system Do this
of your TV
AUTO Set SYSTEM SELECT to
(factory setting) AUTO. If your TV
automatically changes the
color system according to
the input signal, the system
is set to AUTO.
NTSC Set SYSTEM SELECT to
NTSC. The system is set to
NTSC.
PAL Set SYSTEM SELECT to
PAL. The system is set to
PAL.
Notes
• You cannot set the color system in Power Saving
Mode.
• When you play back a VIDEO CD recorded in a
different color system from the one you set to the
unit, the picture image may be distorted.
5 For models with a voltage selector, set
6 Connect the power cord to a wall
PAL
Inserting two R6 (size AA)
batteries into the remote
Note
If you do not use the remote for a long period of time,
remove the batteries to avoid possible damage from
battery leakage and corrosion.
Tip
When the remote no longer operates the system,
replace both batteries with new ones.
VOLTAGE SELECTOR to the local
power line voltage.
Refer to the print on your system's
VOLTAGE SELECTOR for available
settings.
* Saudi Arabian model: 120 – 127/220 V
outlet.
If the plug does not fit the wall socket,
detach the supplied plug adaptor (only for
models equipped with an adaptor).
To turn on the system, press ?/1.
GB
7