Specifications - Sony CMT-GP6V Operating Instructions Manual

Cleaning the cabinet
Clean the cabinet, panel and controls with a soft cloth
slightly moistened with mild detergent solution. Do not
use any type of abrasive pad, scouring powder or
solvent such as thinner, benzene or alcohol.
To save a tape permanently
To prevent a tape from being accidentally recorded
over, break off the cassette tab from side A or B as
illustrated.
Break off the
cassette tab
If you later want to reuse the tape for recording, cover
the broken tab with adhesive tape.
Before placing a cassette in the tape
deck
Take up any slack in the tape. Otherwise, the tape may
get entangled in the parts of the tape deck and become
damaged.
When using a tape longer than 90
minutes
The tape is very elastic. Do not change the tape
operations such as play, stop, and fast-winding
frequently. The tape may get entangled in the tape
deck.
Cleaning the tape heads
Clean the tape heads after every 10 hours of use.
Be sure to clean the tape heads before you start an
important recording or after playing an old tape.
Use a separately sold dry-type or wet-type cleaning
cassette. For details, refer to the instructions of the
cleaning cassette.
Demagnetising the tape heads
Demagnetise the tape heads and the metal parts that
have contact with the tape after every 20 to 30 hours of
use with a separately sold demagnetising cassette. For
details, refer to the instructions of the demagnetising
cassette.

Specifications

Main unit
Amplifier section
The following measured at AC 240 V or AC 120 V, 50/
60 Hz
DIN power output (rated): 20 + 20 W
Continuous RMS power output (reference):
Inputs
MD IN (phono jacks):
MIC (phone jack):
Outputs
PHONES (stereo minijack):
VIDEO OUT (phono jack):
SPEAKERS:
VIDEO CD/CD player section
System
Laser
Frequency response
Wavelength
Signal-to-noise ratio
Dynamic range
Video color system format
(6 ohms at 1 kHz, DIN)
30 + 30 W
(6 ohms at 1 kHz, 10%
THD)
Sensitivity 500 mV,
impedance 47 kilohms
Sensitivity 1 mV,
impedance 10 kilohms
Accepts headphones with
an impedance of 8 ohms or
more
Max. output level 1Vp-p,
unbalanced, Sync
negative, load impedance
75 ohms
Accepts impedance of 6 to
16 ohms.
Compact disc and digital
audio system
Semiconductor laser
(λ=780 nm)
Emission duration:
continuous
2 Hz – 20 kHz (±0.5 dB)
780 – 790 nm
More than 90 dB
More than 90 dB
NTSC, PAL
continued
GB
31