Table of Contents
Advertisement
Timer
Falling asleep to music
— Sleep Timer
You can set the system to turn off after a certain
time, so that you can fall asleep to music.
Use buttons on the remote for the operation.
Press SLEEP repeatedly.
Each time you press the button, the minute
display (the turn-off time) changes cyclically as
follows:
AUTO* t 90MIN t 80MIN t ... t
10MIN t OFF
* The system automatically turns off in 100 minutes or
after the current disc or tape finishes playing.
Other operations
To
Press
Check the
SLEEP once.
remaining time**
Change the time
SLEEP repeatedly to select the
to turn off
time you want.
Cancel the Sleep
SLEEP repeatedly until "OFF"
Timer function
appears.
**You cannot check the remaining time if you select
"AUTO".
Note
Do not set to "AUTO" during Synchro Recording on a
tape.
Tip
You can use the Sleep Timer, even if you have not set
the clock.
Waking up to music
— Daily Timer
You can wake up to music at a preset time. Make
sure you have set the clock (see "Setting the
clock" on page 8).
Use buttons on the remote for the operation.
1
Prepare the sound source you want to
play.
• CD: Load a disc. To start from a specific
track, make a program (see "Creating
your own program" on page 12).
• TAPE: Load a tape.
• TUNER: Tune in a radio station (see
"Listening to the radio" on page 16).
2
Press CLOCK/TIMER SET.
3
Press ./> repeatedly until
"PLAY" appears, then press ENTER.
"ON TIME" appears and the hour
indication flashes.
4
Set the time to start playback.
Press ./> repeatedly to set the hour,
then press ENTER.
The minute indication flashes.
Press ./> repeatedly to set the
minute, then press ENTER.
5
Set the time to stop playback following
the same procedure as step 4.
6
Press ./> repeatedly depending
on the sound source you want to play,
then press ENTER.
Each time you press the button, the display
changes cyclically as follows:
CD t TAPE t TUNER
7
Adjust the volume.
8
Press ?/1 to turn off the system.
continued
GB
21
Advertisement
Table of Contents
