Table of Contents
Advertisement
Listening to the radio
You can listen to a radio station either by
selecting a preset station, or by manually tuning
in the station.
Use buttons on the unit for the operation.
Listening to a preset station
— Preset Tuning
Preset radio stations in the tuner’s memory first
(see “Presetting radio stations” on page 14).
1
Press TUNER/BAND.
2
Press PLAY MODE/TUNING MODE
repeatedly until “PRESET” appears in
the display.
3
Press TUNING +/– repeatedly to select
the desired preset station.
Selecting the desired preset
number using the numeric
buttons
Press the numeric button(s) on the remote
instead of performing step 3.
Listening to non-preset radio
station
— Manual Tuning
1
Press TUNER/BAND repeatedly to
select FM or AM.
2
Press PLAY MODE/TUNING MODE
repeatedly until “AUTO” and
“PRESET” disappear from the display.
3
Press TUNING +/– repeatedly to tune in
the desired station.
Note
When “CD” is selected as the current function and
TUNER/BAND is pressed to select “TUNER” during
“OFF”, it may take some time to switch the function
(page 15).
GB
Tips
• To improve broadcast reception, adjust the supplied
antennas, or connect a commercially available
external antenna.
• When an FM stereo program has static noise, press
REPEAT/FM MODE until “MONO” appears. There
will be no stereo effect, but the reception will
improve.
• In step 2, press PLAY MODE/TUNING MODE
repeatedly until “AUTO” and the frequency appear
in the display, then press and hold TUNING +/– until
the frequency indication starts to change. Scanning
stops when the system tunes in a station (Automatic
Tuning).
• To record the radio programs, use manual recording
(page 18).
• You can change the display into the clock display
(for the six seconds) by pressing DISPLAY on the
remote.
Page 16
Advertisement
Table of Contents
