Table of Contents
Advertisement
Job Number: __________________
Model Number: ________________
Water Hardness: ___________________ ppm or gpg
Capacity Per Unit: ______________
Mineral Tank Size: ___________ Diameter: ___________ Height:
Salt Setting per Regeneration: _____________________________________________
1.
Type of Timer:
A.
7 Day or 12 Day
2.
Downflow
3.
Meter Size:
A.
3/4" Std Range (125 - 2,100 gallon setting)
B.
3/4" Ext Range (625 - 10,625 gallon setting)
C.
1" Std Range (310 - 5,270 gallon setting)
D.
1" Ext Range (1,150 - 26,350 gallon setting)
E.
1 1/2" Std Range (625 - 10,625 gallon setting)
F.
1 1/2" Ext Range (3,125 - 53,125 gallon setting)
G.
2" Std Range (1,250 - 21,250 gallon setting)
H.
2" Ext Range (6,250 - 106,250 gallon setting)
I.
3" Std Range (3,750 - 63,750 gallon setting)
J.
3" Ext Range (18,750 - 318,750 gallon setting)
K.
Electronic __________ Pulse Count __________ Meter Size
4.
System Type:
A.
System #4: 1 Tank, 1 Meter, Immediate, or Delayed Regeneration
B.
System #4: Time Clock
C.
System #4: Twin Tank
D.
System #5: 2-5 Tanks, 2 Meters, Interlock
E.
System #6: 2-5 Tanks, 1 Meter, Series Regeneration
F.
System #7: 2-5 Tanks, 1 Meter, Alternating
G.
System #9: Electronic Only, 2-4 Tanks, Meter per Valve, Alternating
H.
System #14: Electronic Only, 2-4 Tanks, Meter per Valve. Brings units on and offline based on flow.
5.
Timer Program Settings:
A.
Backwash: ____________________ Minutes
B.
Brine and Slow Rinse: ___________ Minutes
C.
Rapid Rinse: ___________________Minutes
D.
Brine Tank Refill: ________________Minutes
E.
Pause Time: __________________ Minutes
F.
Second Backwash: ______________Minutes
6.
Drain Line Flow Control: ____________ gpm
7.
Brine Line Flow Controller: __________________ gpm
8.
Injector Size#: _____________________
9.
Piston Type:
A.
Hard Water Bypass
B.
No Hard Water Bypass
B. Meter Initiated
Upflow
Upflow Variable
Job Specification Sheet
Page 3
Hide quick links:
Advertisement
Table of Contents
