Powered Is; Face Detectionand Tracking - Canon VIXIA HF R40 Instruction Manual

Options (_ Default value)
[D Dynamic]_ Compensates for a higher degree of camcorder
shake, such as when shooting while walking, and is more effec-
tive as the zoom approaches full wide angle.
[D Standard] Compensates for a lower degree of camcorder
shake, such as when shooting while remaining stationary, and is
suitable for shooting natural-looking scenes.
[_ Off] Use this setting when the camcorder is mounted on a
tripod.
Powered IS
You can use Powered IS to make the image stabilization even more
powerful. Holding the LCD panel with your left hand will add to the
stability of the shot
,,_, @ [((_i5} Powered IS] @ [ON] _ [X]
• Repeat. selecung [OFF], to turn off Powered IS.
NOTES
If the degree of camcorder shake is too high, the image stabilizer may
not be able to fully compensate.
[_ Dynamic] is available only when [Zoom Type] is set to
[1_11 Optical].
For surveying and following shots, when you pan the camcorder from
side to side or tilt it up and down, we recommend setting the IS mode
to [_ Dynamic] or [_ Standard].
Face Detectionand Tracking
The camcorder automatically detects people's faces and uses this
information to select the optimal settings for beautiful videos and pho-
tos. You can use tracking to tell the camcorder to track and optimize
settings for a different person. You can also use tracking to always
keep in focus other moving subjects, such as pets or moving vehicles.
76
* Advanced
Shoot r_g