Adjusting The Exposure - Canon VIXIA HF R40 Instruction Manual

To fade in/out
Press [_:r6i5_ in record pause mode to start recording with a fade
in. Press [_i_@_i_i while recording to fade out and pause the
recording.
NOTES
When you apply a fader, not only the picture but also the sound will fade
in or out.
Faders cannot be used in the following cases:
- While using the [Old Movies] cinema-look filter in mode,
- When recording scenes with decorations,
- When recording video snapshot scenes,
- While pre-recording is activated.
- When the video quality is set to 60P or 35 Mbps,
Adjusting the Exposure
At times, backlit subjects may appear too dark (underexposed) or sub-
jects under very strong lights may appear too bright or glaring (overex-
posed). To correct this, you can adjust the exposure manually or use
the Touch AE function to automatically set the optimal exposure for the
subject you select. This is convenient when the brightness of the sub-
ject you want to shoot is noticeably brighter/darker than the general
brightness of the image.
Operating modes:
I
_ POINTS TOOHECK
Select a shooting mode other than the [.:_. Fireworks] Special Scene
mode in mode.
1 Open the exposure adjustment screen.
2 Touch a subject that appears inside the [] frame.
Advanced Shoot ng* 79