1-1-2. HDD
1. Peel off two tapes (1).
2. Remove four screws (2).
3. Disconnect the flexible cable (3) and the connector (4).
4. Remove four screws (5), then remove the dampers (7) and HDD (8).
Note:
• After replacing, attach the tape (1) to its original position.
Connector
Flexible
cable (3)
Damper (7)
Damper (7)
Flexible
cable (3)
Claw
Screws (2)
Screws (5)
Dampers (7)
Tapes (1)
Connector (4)
Fig. 2-1-2
HDD (8)
HDD bracket (6)
Dampers (7)
Screws (5)