1-1-3. Front Panel
1. Remove the top cover. (Refer to item 1-1-1.)
2. Disconnect the connector (1) and flexible cable (2).
3. Remove two screws (3) and four claws, and pull
out the front panel (6).
4. Disconnect the connector (4) and flexible cable (5),
then remove the front panel (6).
Connector (4)
Claw
1-1-4. RAM Drive
1. Remove the front panel.
(Refer to item 1-1-3.)
2. Remove three screws (1).
3. Disconnect the flexible cable (2)
and the connector (3).
4. Remove the RAM drive (4).
Flexible
cable (5)
Screws (3)
Claws
Front panel (6)
Fig. 2-1-3
Flexible
cable (2)
Fig. 2-1-4
Flexible
cable (2)
Connector (1)
Claw
Screws (1)
RAM drive (4)
Connector (3)