1-2-4. Power PC Board
Cautions :
• Danger of explosion if battery is incorrectly replaced.
• Replace only with the same or equivalent type.
1. Remove the fan. (Refer to item 1-1-6.)
2. Disconnect three connectors (1) and two connectors (2).
3. Remove six screws (3) and the power PC board (4).
1-2-5. Front (R), Front (L), Front (Jack) PC Board
1. Remove the front panel. (Refer to item 1-1-3.)
2. Remove four screws (1), then remove the stay (2).
3. Remove seven screws (3), then remove the
front (R) PC board (4).
4. Remove four screws (5), then remove the
front (L) PC board (6).
5. Remove four screws (7), then remove the
front (Jack) PC board (8).
Connector (1)
Connectors (2)
Front (L) PC board (6)
Connectors (1)
Power PC board (4)
Screws (3)
Fig. 2-1-10
Front (Jack)
PC board (8)
Screws (5)
Front panel
Screws (1)
Screws (7)
Screws (3)
Stay (2)
Screw (3)
Front (R) PC board (4)
Fig. 2-1-11